Attached are images of the boards in the machine, the top (daughter board: BED, Z-axis, BED TEMP), and the main (bottom board: X-axis, Y-axis, Extruder 1/RIGHT, Extruder 2/LEFT, and heaters/temp sensors for extruders, LED, and fans). The Filament fan has its own port on the board (1st one on the top at the far right side). The remaining fans are all always on via a splice from the next port below the filament fan.
I'll attached a second set of images of the hot ends.
elmoret wrote:I'm not yet familiar with the Workbench - things I need to know:
- What board does it use? (printrboard, I think?) photo would be helpful.
- What hotends does it use? Photos would be really helpful here.
=====other questions you asked which I will help with after the above are answered====
I'd like to print composites of Nylon or PC with Support and possibly a 3rd filament (flexible).
I will enclose the build volume.
Kraken or Chimera?
I've seen the airtripper bowden projects, but what parts would I need to procure to make this happen beyond what is in the kits you sell?
Do you happen to know if a 3rd extruder would be a simple or complicated addition to the Workbench?
Post's attachmentsFullSizeRender-2.jpg
FullSizeRender-2.jpg 1.82 mb, file has never been downloaded.
FullSizeRender.jpg
FullSizeRender.jpg 1.1 mb, file has never been downloaded.
IMG_1914.JPG
IMG_1914.JPG 2.33 mb, file has never been downloaded.
IMG_1915.JPG
IMG_1915.JPG 1.24 mb, file has never been downloaded.
You don't have the permssions to download the attachments of this post.