You are not logged in. Please login or register.
SoliForum - 3D Printing Community → Buy/Sell/Trade → Australian Filament Suppliers
Great.... now I got the spam song in my head...
F**k.
Me too...
Sorry about that 
Normally I would delete all the spam, but that would wash away the misdeeds of this supplier, so I'll leave this one as a shining example for future customers. I'm tempted to write a short guide to creating a convincing sock puppet to promote your business since it's always done so poorly.
Yeah, I think most spammers just don't put in the extra effort spam properly, it's kinda sad that the spamming industry has been overtaken by point and click spammers there's just no imagination anymore.
Here is another one for the list - my3dmedia com au (I still cant post links) they have ABS and PLA pellets for making your own filament, as well as masterbatch and filastruders&parts.
Placed an order with them, will report back when it arrives.
Here is another one for the list - my3dmedia com au (I still cant post links) they have ABS and PLA pellets for making your own filament, as well as masterbatch and filastruders&parts.
Placed an order with them, will report back when it arrives.
Should be fine - thats CaptCrash here on the forum. Posts mainly in the filastruder area .
http://www.soliforum.com/topic/3380/aus … der-users/
Just wanted to post a shoutout for Ben at ModFab again,
Ordered late Monday and it arrived early Wednesday.. Fairly awesome by Australian post standards.
Better packed than any other filament I've bought too.
Hi everyone,
Just wanted to let you know that I have Australian Made PLA filament 1.75mm for sale. Note the filament is made in Australia, not imported. The colours available are:
JET BLACK
POLAR WHITE
RASPBERRY RED
OCEAN BLUE
GRASSHOPPER GREEN
SHADOW GREY
APRICOT ORANGE
If you are interested please email me at [email protected]
Kind regards,
Jackie.
redback wrote:Here is another one for the list - my3dmedia com au (I still cant post links) they have ABS and PLA pellets for making your own filament, as well as masterbatch and filastruders&parts.
Placed an order with them, will report back when it arrives.
Should be fine - thats CaptCrash here on the forum. Posts mainly in the filastruder area .
http://www.soliforum.com/topic/3380/aus … der-users/
Unfortunately it hasn't worked out. Been over a month since I ordered, and I am no longer receiving any response to messages and the website has gone.
Not good to hear.
Could try calling the number on the Facebook page.. 0432025276
Well, here's what I know:
Looks like Darren/my3dmedia hasn't logged into the forums since mid-January.
I've sent him an email about a week ago when his site wend down as someone contacted me looking to place an order through him, but couldn't. No reply to the email, and I only have his email address for contact.
redback - I'm sending you a PM now to see what you ordered and if there's anything I can do to remedy the situation. If you paid via credit card/PayPal, I'd recommend a claim/chargeback at this point as I haven't heard from him.
Bugger, I was going to use his services when I finally got around to ordering a Filastruder....
Bugger, I was going to use his services when I finally got around to ordering a Filastruder....
It seems he's decided to completely hang his customers out to dry, but has been seen logging into there forums as recently as 10 minutes ago. Still haven't heard from him directly.
Hi everyone, haven't posted in a while but I would like to announce a few new products and a new website.
We are now carrying ColorFabb woodfill material, which comes on a reel! YAY! It is also more economical than the equivalent amount of laywood. Colour is quite a bit lighter and won't fluctuate with temperature like laywood, but it is less brittle and most importantly gives off that satisfying wood smell when printed.
http://3dprintergear.com.au/search?cont … y=woodfill
Also in the ColorFabb range is XT. Not sure really what this material is ( its a secret), but it is very clear and impressively strong.
http://3dprintergear.com.au/specialty-f … bb-xt.html
In the Taulman range there is now coloured T-glase and a new nylon "bridge". This nylon is a close cousin to 645 but will print direct to glass that has PVA glue applied. It also warps less than other nylons, and best of all is significantly cheaper.
http://3dprintergear.com.au/taulman3d-n … s-1lb.html
For the patriotic, we now stock Aussie made ABS and PLA. Limited colours right now, but they will expand in the future.
http://3dprintergear.com.au/36-australian-abs
http://3dprintergear.com.au/37-australian-pla
And lastly, for the adventurous, we will soon have Recreus Filaflex in lots of pretty colours! This material is super soft and flexible and is very similar to Ninjaflex. Comes on 250g rolls so you don't have to pay a fortune for a kilo of material that lasts you 6 months. Due late next week.
http://3dprintergear.com.au/30-recreus
We would also welcome any feedback on the new site. Hopefully it is an improvement on the old one, and you find it clean and easy to navigate. Send your feedback to [email protected] and receive an extra 5% off.
Don't forget the SF5% voucher is still active too.
(discounts valid on all products other than printers)
Thanks for reading!
Cheers
Jamie
Hi All,
Just wanted to let you know we now have the new ColorFabb Bronzefill filament in stock. Very limited quantities though. Really amazing stuff. Here is a bunny I printed at 80 micron then polished with steel wool and Brasso.
https://www.3dprintergear.com.au/specia … 5-lbs.html
Another new product is PolyMakr PolyMax, a PLA that is stronger than ABS and less brittle than normal PLA. I've also had reports back that support is really easy to remove. PolyFlex will be available next week too.
https://www.3dprintergear.com.au/45-polymakr
Thanks for looking!
Cheers
Jamie
Just wanted to post a shoutout for Ben at ModFab again,
Ordered late Monday and it arrived early Wednesday.. Fairly awesome by Australian post standards.Better packed than any other filament I've bought too.
It is not a good idea to print guns...FBI will knock on your door 
It is not a good idea to print guns...FBI will knock on your door
Wrong country for that - no FBI here. And its in safety orange and non functioning so the AFP don't give a toss....
Just a shout out to Jamie @ 3DPrinterGear (again... ) - he was processing my order this morning and called me to confirm a potential 'mistake' on my order - but was a deliberate act on my behalf (Ordered 3mm when I normally do 1.75mm) but it was good of Jamie to call and confirm this morning so my order could still ship out today and big props for him taking the time to sanity check the order and not just take the cash and ship it regardless.
Thanks Adrian! Better to be safe than sorry. Hope you enjoy the filaments.
Just a quick heads up. The Polymakr Polymax is now available in black as well.
Also, if you missed out on bronzefill last time, it's now back in stock.
I hope I've not double up.
I got nothing to do with company, I found them on the net.
We offer Free shipping Australia wide for all filament orders!! Please choose Free filament shipping option from the order page.
stores.ebay.com.au/Aurarum
ABS for $29.50 delivered
aurarum.com.au/14-filament
Cheers Andrew
Good morning
Just wanted to introduce quantum matter to you , we are excited to bring to Australia what we believe to be one of the best PLA and ABS brands available Voltivo
We chose Voltivo based on all there R&D into there product , if you do get a moment please jump on : quantummatter.com.au and check out there support site , we believe once you have used there product to print you will be very satisfied
They go into great detail of technical information down to providing you with the correct settings per different colour.
There groovy QR code that is on each spool will allow you to directly down load all the info to your finger tips.
This is also a review from tweak town on the voltivo product.
Hope you find the info helpful
Cheers
QM
SoliForum - 3D Printing Community → Buy/Sell/Trade → Australian Filament Suppliers
Powered by PunBB, supported by Informer Technologies, Inc.
