<![CDATA[SoliForum - 3D Printing Community — Australian Filament Suppliers]]> https://www.soliforum.com/topic/14/australian-filament-suppliers/ Wed, 26 Nov 2014 19:59:18 +0000 PunBB <![CDATA[Re: Australian Filament Suppliers]]> https://www.soliforum.com/post/73143/#p73143 Good morning
Just wanted to introduce quantum matter to you , we are excited to bring to Australia what we believe to be one of the best PLA and ABS brands available Voltivo
We chose Voltivo based on all there R&D into there product , if you do get a moment please jump on : quantummatter.com.au and check out there support site , we believe once you have used there product to print you will be very satisfied
They go into great detail of technical information down to providing you with the correct settings per different colour.
There groovy QR code that is on each spool will allow you to directly down load all the info to your finger tips.
This is also a review from tweak town on the voltivo product.

Hope you find the info helpful
Cheers
QM

]]> Wed, 26 Nov 2014 19:59:18 +0000 https://www.soliforum.com/post/73143/#p73143 <![CDATA[Re: Australian Filament Suppliers]]> https://www.soliforum.com/post/72980/#p72980 I hope I've not double up.
I got nothing to do with company, I found them on the net.

We offer Free shipping Australia wide for all filament orders!! Please choose Free filament shipping option from the order page.
stores.ebay.com.au/Aurarum
ABS for $29.50 delivered
aurarum.com.au/14-filament

Cheers Andrew

]]> Tue, 25 Nov 2014 01:32:05 +0000 https://www.soliforum.com/post/72980/#p72980 <![CDATA[Re: Australian Filament Suppliers]]> https://www.soliforum.com/post/67345/#p67345 Just a quick heads up. The Polymakr Polymax is now available in black as well.

Also, if you missed out on bronzefill last time, it's now back in stock.

]]> Tue, 30 Sep 2014 06:33:56 +0000 https://www.soliforum.com/post/67345/#p67345 <![CDATA[Re: Australian Filament Suppliers]]> https://www.soliforum.com/post/62574/#p62574 Thanks Adrian! Better to be safe than sorry. Hope you enjoy the filaments.

]]> Fri, 08 Aug 2014 03:29:01 +0000 https://www.soliforum.com/post/62574/#p62574 <![CDATA[Re: Australian Filament Suppliers]]> https://www.soliforum.com/post/62095/#p62095 Just a shout out to Jamie @ 3DPrinterGear (again... ) - he was processing my order this morning and called me to confirm a potential 'mistake' on my order - but was a deliberate act on my behalf (Ordered 3mm when I normally do 1.75mm) but it was good of Jamie to call and confirm this morning so my order could still ship out today and big props for him taking the time to sanity check the order and not just take the cash and ship it regardless.

]]> Tue, 05 Aug 2014 09:17:58 +0000 https://www.soliforum.com/post/62095/#p62095 <![CDATA[Re: Australian Filament Suppliers]]> https://www.soliforum.com/post/62000/#p62000 oklok wrote:

It is not a good idea to print guns...FBI will knock on your door wink

Wrong country for that - no FBI here. And its in safety orange and non functioning so the AFP don't give a toss....

]]> Mon, 04 Aug 2014 10:09:25 +0000 https://www.soliforum.com/post/62000/#p62000 <![CDATA[Re: Australian Filament Suppliers]]> https://www.soliforum.com/post/61998/#p61998 Serin wrote:

Just wanted to post a shoutout for Ben at ModFab again,
Ordered late Monday and it arrived early Wednesday.. Fairly awesome by Australian post standards.

Better packed than any other filament I've bought too.
http://i.imgur.com/MHP2cWs.jpg

It is not a good idea to print guns...FBI will knock on your door wink

]]> Mon, 04 Aug 2014 10:02:58 +0000 https://www.soliforum.com/post/61998/#p61998 <![CDATA[Re: Australian Filament Suppliers]]> https://www.soliforum.com/post/61056/#p61056 Hi All,

Just wanted to let you know we now have the new ColorFabb Bronzefill filament in stock. Very limited quantities though. Really amazing stuff. Here is a bunny I printed at 80 micron then polished with steel wool and Brasso.

http://i376.photobucket.com/albums/oo209/wilsonjpr/bronzerabbit_zpsc3fa8dc0.jpg

https://www.3dprintergear.com.au/specia … 5-lbs.html

Another new product is PolyMakr PolyMax, a PLA that is stronger than ABS and less brittle than normal PLA. I've also had reports back that support is really easy to remove. PolyFlex will be available next week too.

https://www.3dprintergear.com.au/45-polymakr

Thanks for looking!

Cheers
Jamie

]]> Wed, 23 Jul 2014 23:15:43 +0000 https://www.soliforum.com/post/61056/#p61056 <![CDATA[Re: Australian Filament Suppliers]]> https://www.soliforum.com/post/53103/#p53103 Hi everyone, haven't posted in a while but I would like to announce a few new products and a new website.

We are now carrying ColorFabb woodfill material, which comes on a reel! YAY! It is also more economical than the equivalent amount of laywood. Colour is quite a bit lighter and won't fluctuate with temperature like laywood, but it is less brittle and most importantly gives off that satisfying wood smell when printed.
http://3dprintergear.com.au/search?cont … y=woodfill


Also in the ColorFabb range is XT. Not sure really what this material is ( its a secret), but it is very clear and impressively strong.
http://3dprintergear.com.au/specialty-f … bb-xt.html


In the Taulman range there is now coloured T-glase and a new nylon "bridge". This nylon is a close cousin to 645 but will print direct to glass that has PVA glue applied. It also warps less than other nylons, and best of all is significantly cheaper.
http://3dprintergear.com.au/taulman3d-n … s-1lb.html


For the patriotic, we now stock Aussie made ABS and PLA. Limited colours right now, but they will expand in the future.
http://3dprintergear.com.au/36-australian-abs
http://3dprintergear.com.au/37-australian-pla


And lastly, for the adventurous, we will soon have Recreus Filaflex in lots of pretty colours! This material is super soft and flexible and is very similar to Ninjaflex. Comes on 250g rolls so you don't have to pay a fortune for a kilo of material that lasts you 6 months. Due late next week.
http://3dprintergear.com.au/30-recreus


We would also welcome any feedback on the new site. Hopefully it is an improvement on the old one, and you find it clean and easy to navigate. Send your feedback to info@3dprintergear.com.au and receive an extra 5% off.

Don't forget the SF5% voucher is still active too.

(discounts valid on all products other than printers)

Thanks for reading!

Cheers
Jamie

]]> Fri, 28 Mar 2014 00:30:50 +0000 https://www.soliforum.com/post/53103/#p53103 <![CDATA[Re: Australian Filament Suppliers]]> https://www.soliforum.com/post/52547/#p52547 Serin wrote:

Bugger, I was going to use his services when I finally got around to ordering a Filastruder....

It seems he's decided to completely hang his customers out to dry, but has been seen logging into there forums as recently as 10 minutes ago. Still haven't heard from him directly.

]]> Thu, 20 Mar 2014 05:36:52 +0000 https://www.soliforum.com/post/52547/#p52547 <![CDATA[Re: Australian Filament Suppliers]]> https://www.soliforum.com/post/52532/#p52532 Bugger, I was going to use his services when I finally got around to ordering a Filastruder....

]]> Thu, 20 Mar 2014 00:09:51 +0000 https://www.soliforum.com/post/52532/#p52532 <![CDATA[Re: Australian Filament Suppliers]]> https://www.soliforum.com/post/52367/#p52367 Well, here's what I know:

Looks like Darren/my3dmedia hasn't logged into the forums since mid-January.
I've sent him an email about a week ago when his site wend down as someone contacted me looking to place an order through him, but couldn't. No reply to the email, and I only have his email address for contact.

redback - I'm sending you a PM now to see what you ordered and if there's anything I can do to remedy the situation. If you paid via credit card/PayPal, I'd recommend a claim/chargeback at this point as I haven't heard from him.

]]> Tue, 18 Mar 2014 02:29:08 +0000 https://www.soliforum.com/post/52367/#p52367 <![CDATA[Re: Australian Filament Suppliers]]> https://www.soliforum.com/post/52362/#p52362 Not good to hear.
Could try calling the number on the Facebook page.. 0432025276

]]> Tue, 18 Mar 2014 02:07:37 +0000 https://www.soliforum.com/post/52362/#p52362 <![CDATA[Re: Australian Filament Suppliers]]> https://www.soliforum.com/post/52360/#p52360 adrian wrote:
redback wrote:

Here is another one for the list - my3dmedia com au (I still cant post links) they have ABS and PLA pellets for making your own filament, as well as masterbatch and filastruders&parts.

Placed an order with them, will report back when it arrives.

Should be fine - thats CaptCrash here on the forum. Posts mainly in the filastruder area .
http://www.soliforum.com/topic/3380/aus … der-users/

Unfortunately it hasn't worked out. Been over a month since I ordered, and I am no longer receiving any response to messages and the website has gone.

]]> Tue, 18 Mar 2014 02:03:08 +0000 https://www.soliforum.com/post/52360/#p52360 <![CDATA[Re: Australian Filament Suppliers]]> https://www.soliforum.com/post/51340/#p51340 Hi everyone,

Just wanted to let you know that I have Australian Made PLA filament 1.75mm for sale. Note the filament is made in Australia, not imported.  The colours available are:

JET BLACK
POLAR WHITE
RASPBERRY RED
OCEAN BLUE
GRASSHOPPER GREEN
SHADOW GREY
APRICOT ORANGE

If you are interested please email me at jackie@tripledprinting.com.au

Kind regards,

Jackie.

]]> Mon, 03 Mar 2014 12:03:40 +0000 https://www.soliforum.com/post/51340/#p51340