Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]
Yes, if you would have the Repetier firmware for Nano (or if someone would write such firmware).
- modfreakz
- Member
- Offline
Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]
I use xyz Firmware Flash tool v1.95 and my da Vinci Minimaker has Firmware 1.1.4 installed.
Whenever I try to downgrade to 1.1.1 or upgrade to 1.2.4 the program reports success
but the printers led stays RED for a very long time. After serveral minutes I press it and it
turns green again and the flash tool reports it still has 1.1.4... so no success
I am running the software in win11 and I tried to elevate the program to admin but no luck.
- modfreakz
- Member
- Offline
Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]
The daVinci miniMaker with fingerprint dv1MX0B000 (not dv1MX0A000) is or use some Demo firmware. It can use third-party filaments.
Seems there are two different printer being sold as "da Vinci miniMaker"
dv1MX0A000 - latest firmware 1.2.4 - can NOT use third-party filaments
dv1MX0B000 - latest firmware 1.1.4 - CAN use third-party filaments
But the hardware is 100% identical.
It is while ago, but if I remember well, it's possible to convert (cross flash) the dv1MX0B000 to dv1MX0A000.
First you have to flash (use my tool) v1.1.5 then v1.2.4. (after flashing 1.2.4 your printer will be recognized as dv1MX0A000).
You can anytime recover or go back to 1.1.4
Use this http://www.soliforum.com/topic/17845/do … rmininano/
Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]
Hey guys, hope this community is still alive and well.
Ever since downgrading, my mini w has been doing some really weird stuff. It gives me an 0028 error on my tags, so I can't use them to print. Also, now the extruder won't even heat up?? What did I do wrong? a̶s̶i̶d̶e̶ ̶f̶r̶o̶m̶ ̶b̶u̶y̶i̶n̶g̶ ̶o̶n̶e̶ ̶o̶f̶ ̶t̶h̶e̶s̶e̶
Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]
it didnt work now when i plug my printer in it make a huming noise. i have a da vinci mini w,
181 2025-01-30 08:09:46 (edited by modfreakz 2025-01-30 08:11:03)
- modfreakz
- Member
- Offline
Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]
@windey777 and @ahallman.2028
Looks like the downgrade was not clean. Use recovery mode and flash from scratch.
182 2025-04-20 10:19:05 (edited by TAV70 2025-04-21 14:09:01)
Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]
Can you also flash a Da Vinci Super dv1SW0A000 with the software
183 2025-04-22 17:01:14 (edited by modfreakz 2025-04-22 17:04:29)
- modfreakz
- Member
- Offline
Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]
theoretically yes, but why you would like to reflash this board?
Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]
I have a Da Vinci Super with firmware 1.1.2 and would like to upgrade to 1.1.9. I'm having Wi-Fi issues and hope the new firmware will also be able to process G-code, not just *.3w files, and that there are other improvements.
185 2025-04-23 13:33:39 (edited by mangum.ryne 2025-04-23 13:36:08)
Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]
Hello im trying to downgrade my XYZ Da Vinci jr 1.0W from v2.3.3 to v2.2.7 so that I can hack the filament chip a little easier. But when I use the tool the tool says successful but the printer says failed and still reads the v2.3.3. ANy help would be appreciated.
Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]
Hello, I'm looking for the restore.img for the da Vinci 1.0 Pro (model dvF1W0A000) to resolve an internal storage error (Error 0040). Could someone please share it or point me to a mirror? Thank you in advance!
Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]
Thank you bro so much, I literally stumbled upon this after trying to find a fix for the third day now. I had to make an account to thank you.
188 2026-04-22 03:42:36 (edited by booleanish 2026-04-22 03:45:30)
Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]
I'm using windows 11 laptop and my printer is da vinci jr 1.0
I originally tried to update using XYZprint R2 Beta. I was able to connect to the printer but update button was greyed out.
So I was trying to using this tool.
The problem is my printer's model is listed on teh serial port drop down menu, but I can't connect to it.
Even if I click connect button, literally nothing happens.
Does anyone have a same issue?? or do I need prerequisite steps before this?
Please help me..