1 Topic by modfreakz (edited by modfreakz 2022-05-29 19:42:12)

  • modfreakz
  • modfreakz
  • Member
  • Offline
  • Registered: 2017-12-02
  • Posts: 199

Topic: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

XYZ Firmware Flash Tool

[Downgrade XYZ Printers to any Firmware for all daVinci 1.0/1.0A/Duo/AiO/Pro/Plus/Junior/Mini/Nano/....]


I would like to share simple way to Update/Downgrade all daVinci printers (SAM3 and SAM4 based) to any older Firmware.


This program has three modes [Offline]  [Online]  [Recovery]


Offline Mode:
Load original encrypted Firmware files to Update/Downgrade.


Online Mode:
Choose compatible Firmware version for connected 3D Printer to Update/Downgrade.
Also let you download the Firmware files to local drive.


Recovery:
In this mode you can upload any Atmel dump or Repetier firmware to the SAM3/SAM4 flash chip.





Just update the program with "new special ultra super duper godmode hack"
This mean we have now full downgrade possibility at any time!!


This printers have full downgrade support at the moment, others are partial possible.

- dv1MW0A000   daVinci Mini w
- dv1MW0B000   daVinci Mini wA
- dv1MX0A000   daVinci Mini Maker
- dv1MW0C000   daVinci Mini w+
- dv1J00A000   daVinci Jr. 1.0
- dv1JW0A000   daVinci Jr. 1.0 w
- dvF200A000   daVinci 2.0A Duo
- dv1NX0A000   daVinci Nano
- dv1JS0A000   daVinci Jr. 3in1
- dvF10SA000   daVinci 1.0 AiO
- dvF1W0A000   daVinci 1.0 Pro
- dv1JP0A000   daVinci Jr. 1.0 Pro

Please send me the Atmel dump of the printers not listed, so that I can add more printers to the "full downgrade mode".




For any problems or recovery needed, there is another way, look here:
 http://www.soliforum.com/topic/17845/do … rmininano/


  • Firmware collection for mostly all XYZ printers (old, new, decrypted Firmware and Atmel dumps)

        Link to Firmware collection

        Link to XYZ Firmware Flash Tool


http://soliforum.com/i/?SdXq4M6.png

http://soliforum.com/i/?lWoLNpB.png

http://soliforum.com/i/?NfF1PNk.png



HowTo:
1 Select or Drag&Drop your encrypted Firmware file or Repetier/Atmel firmware
2. Select your Printer (COM port) and press "Connect" button
3. Press Update/Downgrade/Program button (depending on your case)




XYZ Firmware Flash Tool - Version History
---------------------------------------------------------
(v1.95)
- Add support for all known firmware May 2022
- Add full downgrade support for "daVinci Jr. 1.0 Pro"


(v1.91)
- Improved firmware detection

(v1.90)
- Add support for all known firmware Januar 2022
- Add full downgrade support for "daVinci 1.0 AiO"
- Add full downgrade support for "daVinci 1.0 Pro"
- Changed COM-Port detection and appearance for more read comfort
- Fixed bugs and optimized the automatic program update function

(v1.80)
- Add support for all known firmware Januar 2021
- Add full downgrade support for "daVinci Jr. 3in1"
- Fixed rare bug in recovery/flash mode

(v1.72)
- Bug fix in firmware file defection

(v1.70)
- Add support for all known firmware June 2020
- Add full downgrade support for "daVinci Nano"

(v1.60)
- Add support to update old 3D printers (SAM3 based)
- Add new online firmware update mode
- Add BOSSA recovery/flash mode (for Atmel dumps or Repetier firmware)

(v1.50)
- Add support for all known firmware Januar 2020
- new improvemens and bug fixes

(v1.40)
- Add support for all known firmware August 2019

(v1.30)
- Add support for all known firmware April 2019

(v1.20)
- Add support for all known firmware March 2019

(v1.10)
- Add support for all known firmware February 2019

(v1.00)
- Initial Version

Post's attachments

XYZ_Firmware_Flash_Tool_v1.95.zip 2.47 mb, 95 downloads since 2022-05-29 

You don't have the permssions to download the attachments of this post.

2 Reply by jeboo

  • jeboo
  • Member
  • Offline
  • Registered: 2017-09-29
  • Posts: 11

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

Nice work man! Unfortunately I tried reverting 1.2.9 back to 1.2.7 on a mini w, did not work (no errors returned).

3 Reply by modfreakz

  • modfreakz
  • modfreakz
  • Member
  • Offline
  • Registered: 2017-12-02
  • Posts: 199

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

jeboo wrote:

Nice work man! Unfortunately I tried reverting 1.2.9 back to 1.2.7 on a mini w, did not work (no errors returned).


Hi, I have updated the tool, now it is supporting new firmware.
Please give another try!

4 Reply by Zabbel

  • Zabbel
  • Newbie
  • Offline
  • Registered: 2018-12-11
  • Posts: 3

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

modfreakz wrote:

Hi, I have updated the tool, now it is supporting new firmware.
Please give another try!

I have tested the updated tool on my Mini W and it works! Nice work!

5 Reply by zhouchangsoul

  • zhouchangsoul
  • Newbie
  • Offline
  • Registered: 2019-03-04
  • Posts: 1

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

I tried reverting 1.2.4 back to 1.1.3 on a da vinci 1.0 Aio, did not work downgrade failure

6 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

zhouchangsoul wrote:

I tried reverting 1.2.4 back to 1.1.3 on a da vinci 1.0 Aio, did not work downgrade failure


This app is not for the Aio. The Aio uses a different board that cannot be downgraded this way.
It tells you in the first post what printers this app supports.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

7 Reply by albermicro

  • albermicro
  • Newbie
  • Offline
  • Registered: 2018-09-16
  • Posts: 3

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

Hi everybody,

I have a Da Vinci mini W.
I have just tried to downgrade the firmware to verson 1.0.4.
After the downgrade (the APP told that the task was sucessful). The printer can not boot. I hear a sound like it is starting but nevers ends.

Anyone have any idea how to fix that, My printer is dead?
USB do not work anymore, any response from it... . The system do not detect new hardware.

Thanks in advance.

8 Reply by albermicro

  • albermicro
  • Newbie
  • Offline
  • Registered: 2018-09-16
  • Posts: 3

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

Dawn printer! I did not find any way to fix on the internet...
Here is the video about the issue.
https://www.mediafire.com/file/qij5a0x9 … 1.m4v/file

9 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

albermicro wrote:

Dawn printer! I did not find any way to fix on the internet...
Here is the video about the issue.
https://www.mediafire.com/file/qij5a0x9 … 1.m4v/file


Go here!

http://www.soliforum.com/topic/17845/do … rmininano/

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

10 Reply by modfreakz

  • modfreakz
  • modfreakz
  • Member
  • Offline
  • Registered: 2017-12-02
  • Posts: 199

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

albermicro wrote:

Hi everybody,

I have a Da Vinci mini W.
I have just tried to downgrade the firmware to verson 1.0.4.
After the downgrade (the APP told that the task was sucessful). The printer can not boot. I hear a sound like it is starting but nevers ends.

Anyone have any idea how to fix that, My printer is dead?
USB do not work anymore, any response from it... . The system do not detect new hardware.

Thanks in advance.


You should have waited longer.

After the update (successful message), it can happen that you will hear a noise for a while.

That means that internal update is still in progress. This could take up to a minute.

In the DaVinci miniW printer it is the WLAN module that is being updated.


As "carl_m1968" said, go to the link and make the recovery reflashing process.

11 Reply by albermicro

  • albermicro
  • Newbie
  • Offline
  • Registered: 2018-09-16
  • Posts: 3

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

Thanks a lot!
The printer is live again

12 Reply by bothegamers

  • bothegamers
  • Member
  • Offline
  • Registered: 2019-03-24
  • Posts: 10

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

sadly everything i try dosent work the printer keeps its firmware

my printer is a da vinci jr 1.0 i tried downgrading to 2.2.0

but everytime the program says that its succesful but the firmware of the printer keeps at 2.4.6

13 Reply by modfreakz

  • modfreakz
  • modfreakz
  • Member
  • Offline
  • Registered: 2017-12-02
  • Posts: 199

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

Hi, I have updated the program, please try again!

14 Reply by bothegamers

  • bothegamers
  • Member
  • Offline
  • Registered: 2019-03-24
  • Posts: 10

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

modfreakz wrote:

Hi, I have updated the program, please try again!

first of all thanks a lot for the work you are doing!!!!

and second it tried i replaced the firmware tool with the 1.20 one and loaded the firmware..

i tried both modes of the 3D printer bootloader and normal but none of them worked out
im gonna do another try with the mac version of xyx ware as i heard it works out (using virtual box)

note: i think after the 2.2.6 the xyz printing introduced a block that obstacles from flashing older firmware..

best regards - flavio

15 Reply by bjeromin

  • bjeromin
  • Member
  • Offline
  • Registered: 2017-07-07
  • Posts: 17

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

Just tried on my Da vinci jr 1.0 and it works!

16 Reply by modfreakz

  • modfreakz
  • modfreakz
  • Member
  • Offline
  • Registered: 2017-12-02
  • Posts: 199

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

bothegamers wrote:

note: i think after the 2.2.6 the xyz printing introduced a block that obstacles from flashing older firmware..

wrong! Try again, also use the "Downgrade Firmware" button.

17 Reply by bothegamers (edited by bothegamers 2019-03-30 12:59:51)

  • bothegamers
  • Member
  • Offline
  • Registered: 2019-03-24
  • Posts: 10

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

okay i tried again same result the printer sais update failure andhttp://soliforum.com/i/?NAULdES.jpg then keeps its firmware sad

18 Reply by bothegamers

  • bothegamers
  • Member
  • Offline
  • Registered: 2019-03-24
  • Posts: 10

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

bothegamers wrote:

okay i tried again same result the printer sais update failure andhttp://soliforum.com/i/?NAULdES.jpg then keeps its firmware sad

also yes im using the downgrade button

19 Reply by modfreakz

  • modfreakz
  • modfreakz
  • Member
  • Offline
  • Registered: 2017-12-02
  • Posts: 199

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

what exactly is your printer and current firmware? photos please!

20 Reply by bothegamers

  • bothegamers
  • Member
  • Offline
  • Registered: 2019-03-24
  • Posts: 10

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

modfreakz wrote:

what exactly is your printer and current firmware? photos please!

okay wait a sec

21 Reply by bothegamers

  • bothegamers
  • Member
  • Offline
  • Registered: 2019-03-24
  • Posts: 10

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

bothegamers wrote:
modfreakz wrote:

what exactly is your printer and current firmware? photos please!

okay wait a sec

http://soliforum.com/i/?dLlNZ3H.jpg

http://soliforum.com/i/?1H8hFIL.jpg

22 Reply by bothegamers

  • bothegamers
  • Member
  • Offline
  • Registered: 2019-03-24
  • Posts: 10

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

modfreakz wrote:

what exactly is your printer and current firmware? photos please!


did you find any solution?

23 Reply by modfreakz

  • modfreakz
  • modfreakz
  • Member
  • Offline
  • Registered: 2017-12-02
  • Posts: 199

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

I have tried on my daVinci Jr. 1.0 w, no problem to downgrade.

Do you have dv1JW0A000 or dv1J00A000 printer?

24 Reply by bothegamers

  • bothegamers
  • Member
  • Offline
  • Registered: 2019-03-24
  • Posts: 10

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

modfreakz wrote:

I have tried on my daVinci Jr. 1.0 w, no problem to downgrade.

Do you have dv1JW0A000 or dv1J00A000 printer?

the program says this one
https://cdn.discordapp.com/attachments/ … nknown.png

25 Reply by piet.jauquet

  • piet.jauquet
  • Newbie
  • Offline
  • Registered: 2019-05-04
  • Posts: 5

Re: XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]

Hello, I try to downgrade my da Vinci mini w based on 1.3.1, after I downgrade, the message it's successful, but on the info the version of the firmware it's 1.3.1