You are not logged in. Please login or register.
SoliForum - 3D Printing Community → XYZ Printing Hacks & Mods → XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]
Ups! that could be my fault.
try to press on the Offline|Online tabs, it will enable it.
I will check it.
It still doesn't work, is there anything I can do to help find the problem?
try this version
XYZ Firmware Flash Tool - Version History
---------------------------------------------------------
(v1.91)
- Improved firmware detection
try this version
XYZ Firmware Flash Tool - Version History
---------------------------------------------------------
(v1.91)
- Improved firmware detection
I already tried it and now the upgrade button is enabled, however the printer fails, I tried a couple of versions and the same thing happened
EDIT: As I noticed that only the upgrade button was enabled, I updated the printer from 1.2.7 to 1.3.1 and it worked fine, I did this just to test because what I want is to do a downgrade, but the downgrade button still not enabled.
hi
i have downlod all the zip files for the xyz printer.
A password is requested when extracting the ZIP file.
can you help me ?
i can't do enything on my Printer it's a 1.1 plus.
i will load FW ore Repetiere
hi
i have downlod all the zip files for the xyz printer.
A password is requested when extracting the ZIP file.
can you help me ?
i can't do enything on my Printer it's a 1.1 plus.
i will load FW ore Repetiere
What are you using to unzip it? I just checked the file on the front page and it does not ask for a password. Are you sure you are using the correct file?
hi
with the normal win 10 programm an the 7-zip.
do I need an account with hidrive ?
Tried to flash mine, now it cant even connect anymore.
Serial Port is just empty after the flash.
Tried to restart the davinci but nothing changed.
Using XYZ Firmware Flash Tool v1.91 for Davinci Mini w
You did not wait long enough, the internal update was not finished!
If you see no COM port in device manager, then you have to use the recovery mode.
http://www.soliforum.com/topic/17845/do … rmininano/
If you need more help PM me!
You did not wait long enough, the internal update was not finished!
If you see no COM port in device manager, then you have to use the recovery mode.
http://www.soliforum.com/topic/17845/do … rmininano/
If you need more help PM me!
Thank you!
I managed to reflash it and it's now up and running.
Question;
It says "Your current filament has been temporarily suspended!!".
I used dv1MW0A000+1.1.9_Atmel_dump.bin to flash the Mini w, what is required to use the custom tags again?
Is it the software or what will i need to do?
Thank you!
And great job on the information and apps - excellent work!
Hello,
you probably did not inserted the serial number to the Atmel dump, right? This is very important.
Hello,
You probably did not inserted the serial number to the Atmel dump, right? This is very important.
Good to see you again, We were talking about a problem in which I could not press the upgrade or downgrade buttons, where you updated to version 1.91, and now I can push the upgrade button but the downgrade button still not available, I tried doing an upgrade and it worked fine , but I still don't have the downgrade button.
Is there anything I could do to help you?
Could you please upload screenshot of such situation?
Could you please upload screenshot of such situation?
of course yes, here the image
as you can see, only the upgrade button is available
Hello,
you probably did not inserted the serial number to the Atmel dump, right? This is very important.
Yeah, that was most certainly it!
It's now running with other type of filament.
Again, amazing work!
Thank you for all the help!
It's now running with other type of filament.
Thank you for all the help!
Nice to hear that, thx!
of course yes, here the image
as you can see, only the upgrade button is available
Now I see what you mean.
It's easy. Your type of printer is quite old and uses an old flashing routine. In this case, the "Upgade Button" is used for upgrade and downgrade. At the moment I don't have such printer here, so I can't test it. But you can simply try this.
PeaBass wrote:of course yes, here the image
as you can see, only the upgrade button is availableNow I see what you mean.
It's easy. Your type of printer is quite old and uses an old flashing routine. In this case, the "Upgade Button" is used for upgrade and downgrade. At the moment I don't have such printer here, so I can't test it. But you can simply try this.
I have tried several ways to do it, the first time I couldn't do a downgrade so I did an upgrade from 1.2.7 to 1.3.1 and it did fine, (I did this just to test), today I tried again and just I was able to download to version 1.2.7 by pressing the upgrade button, but I can't download to lower versions than 1.2.7, the machine tries to update itself when I select a previous version (1.2.0 for example) and give it upgrade button, but on the printer's display it says UPDATING FAIL after a few seconds.
XYZ Firmware Flash Tool - Version History
---------------------------------------------------------
(v1.95)
- Add support for all known firmware May 2022
- Add full downgrade support for "daVinci Jr. 1.0 Pro"
XYZ Firmware Flash Tool - Version History
---------------------------------------------------------
(v1.95)
- Add support for all known firmware May 2022
- Add full downgrade support for "daVinci Jr. 1.0 Pro"
Hi again, I have tested the 1.95version and and unfortunately I still can't downgrade the firmware, I'm still with 1.2.7, what bad luck I have hahaha
does any have firmware version of 2.20 or less for the de vinci jr 1.0 the hidrive i click on is just a blank page
sorry, but I see no problem? It's all there!
https://my.hidrive.com/share/j8ee51tz13#$/dv1J00A000_%5BdaVinci%20Jr.%201.0%5D
I see it too 
sorry, but I see no problem? It's all there!
https://my.hidrive.com/share/j8ee51tz13#$/dv1J00A000_%5BdaVinci%20Jr.%201.0%5D
Hi I recently had a Da Vinci 2.0 Duo 3D printer I would like to know which is the best firmware to put I have this in the photo I realized that for ABS material the bed temperature is 70° C is that of the extruder and 220C
what do you recommend me to do
Can this program be used to change the firmware to Repetier? (On a nano)
SoliForum - 3D Printing Community → XYZ Printing Hacks & Mods → XYZ Firmware Flash Tool [Downgrade daVinci to any older Firmware]
Powered by PunBB, supported by Informer Technologies, Inc.