Editing Settings in Makerbot, Replicator-G & Simplify3D software (Page 2 of 4)

I started to try to find an older version to download
but it seems that the latest version of Python would have better chance of working with W10,
than an older version would ?

I my try it anyway, the conflict may not be with W-10, but with Rep-G version I have ?

Are the parameters Not changing because I'm using Slic3r 0.X instead of Skeinforge ?

Still can not figure out Where Makerbot-3.7 software stores profile settings data ??
Must be in Windows Registry ?
I will try to find it there next.

I wish I could solve problems with it,
then there would be no need to use Rep-G , which is not as easy to use.

I've not been using Makerbot software when printing objects that have first layers wider than 70mm.
Since I found that, if larger than that, it will not print All of first layers before doing other layers.
So, it prints 3rd or 4th layers Way Above the Bed-plate, at one side of object.
Only happens with Makerbot,
can use Same .stl files, in Rep-G, with no problems.

It acts like something is running out of memory space for each layers data,
but don't really know what is causing it ??
I know it's not a hardware problem, also, since Rep-G works.

Correct, the larger the objects first layers are , the smaller percentage of them will be printed,
before going to other layers.
It's sort of a Stair-step results on layers.

Only a few of us are using makerbot period. This has never been a makerbot forum since they are proprietary. Until the clones like FF and CTC came out nothing about makerbot was heard here. I think last count including you and I there are only three active posters for the CTC model.

I use version 2.2 becauae my model will only work on XP due to the current firmware. So I may not be able to replicate your issue.

BTW: I know that Makerbot-2.4 will work with both W-7 and W-10,
but have not tried 2.2.

Can't you upgrade the Firmware in printer ??
Seems like that would be easier than going to new PC-board ?

Yes, I'm reading Good reviews about Sailfish

I could Not find a Revision or Part number on the Mightyboard in our printer .
It may be on top side but not on component side of PC-board.

It did Not even have a Manufacturers name on that side,
and I'm not going to remove board just to look at top side. LOL

Note: PC-Board does look different than those I've seen on eBay

I was Only trying to find Info about the board in Our printer Now,
without that I would not know what to get as replacement or for a Firmware change ?

I found a board with Wanhao name on it, that looks similar, but may not be exactly the same.
Wanhao board is similar to Flashforge board Also, but not exactly.
Must be just a different Revision of same board.

Also trying to find more info about Revision Numbers.
I've seen them from A to E

Don't all those companies call it the Mightyboard ? ( Makerbot, Flashforge, CTC, Wanhao, etc.)

I read that one difference in revisions was also difference in type of FETs used,
and stuff like that cause SMOKE if not correct !

According to Sailfish website, board revision must be matched to Sailfish version ??
If Sailfish won't work with the Rep-G I Have, I don't think I would want to change to it
Don't Need Another complication !
I think you need to get a CTC firmware Upgrade, if possible ?

Thanks for the link.
Some very Good Info there,
but I saw nothing about the differend Mightyboard revision models,
and nothing about the software and firmware compatibility ? That we were talking about.

The Flashforge Manual , .pdf file download link, has great Info also.
I need to study that Manual More. (Appears to have some info about various software)
I sure wish I had known about that Manual 2 months ago,
since I had to learn most of that the 'Hard Way'.
Our CTC came with No documentation.