Re: XYZprinting Da Vinci 1.0 Hacking
If it is reading 999 there's something not hitting right. Xyz says to aim for within 20 of each other, but they also say that optimum is between 200 and 250. Mine's at like 140, but my prints look like crap regardless. I think their filament is half to blame. My prints look like filament contamination. I took the nozzle off and completely cleaned it today. Even one or two messed up prints can get burned and in places you wouldn't imagine. My metal indicator piece had buildup on in (hence why I was releveling). The head pops off pretty easily-there's a plastic spring loaded handle above the head (in the back). Life it up and the head pulls out. You will have to into 2 connectors.