wykinger wrote:Do anyone know where to reset the Mainboard at Junior 1.0 ? I rewrote the original values to my NFC Tag in the Filamentspool but the printer seems to "remember" its been used and says its empty. If the board is resetted it shall forgotten this and i can reuse the tag in theory....
Incorrect. The data for the tags is stored in a location that is not cleared on reset. Furthermore if you do use the reset jumper also known as the clear jumper it will erase your current firmware leaving only the bootloader and rendering your machine useless unless you have the firmware bin and the capability to JTAG program back to the machine.
If it was that easy it would have been done already don't you think?
Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.