Re: DaVinci Junior cartridge reset
I updated the instructable with more info about battery life on the first page.
http://www.instructables.com/id/EMUTAG- … -Printers/
Take into consideration that you can feed emutag from 3.3 < 5.5v without batteries
Emutag FAQ
WARNING! The power terminals on the programming slot connect directly in parallel with the batteries. The batteries must be removed before connecting a programmer providing external power. Powering the Emulator with batteries inserted will cause a high current flow through the batteries, which can make them explode or catch fire.
You can simply feed it with an arduino nano for 3 bucks (Arduino Nano Clone), 2 pin cables, usb cable, and a simply AC to USB from any HD, smartphone or whatever.
You don't even have to upload any sketch to the nano, just connect cables to ground and 5v of the arduino and EMU, and the usb cable to AC current.
Regards!.
If you are in a hurry and need your password NOW, or if it takes me too long for you, you can read the posts from 1851. I'm not going to be as effective as Bozo or Cgrillo, but you can give a try with me. If PASSWORDS thread follow it's current flow: asking for repeated passwords, not returning or false PACKS... I will end up with it as others before me.