1 Topic by roman

  • roman
  • Newbie
  • Offline
  • Registered: 2013-04-06
  • Posts: 7

Topic: Extruder Temperatur Reset

Hi@all
Sorry first for my bad english. I got a Problem with my Solibaby..:-(

I got a solidoodle 3. Now i got a strange Problem.
I am able to warm up my Extruder to the preset max Temperatur.
I use Slicer.
When i start to print, the Extruder Temp goes down to 25 Degrees. But the Extruder button on the Repetrier Host Program still lights.
I already update the Repetier Host, but i got still the same problem in all Versions.
Now i think its a Slicer Setting Prolem or a Hardware Problem.

Do anybody have an Idea, why i got this Problem?

Best Regards
Roman

2 Reply by elmoret

  • elmoret
  • Filastruder
  • Offline
  • Registered: 2012-10-11
  • Posts: 6,048

Re: Extruder Temperatur Reset

7 threads on the same issue is a bit much.

By the way, your problem has been discussed here extensively. Try searching.

Filastruder - the robust, inexpensive filament extruder
E3Dv6 All Metal Hotend - the premier 3D printing hotend

3 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: Extruder Temperatur Reset

elmoret wrote:

7 threads on the same issue is a bit much.

By the way, your problem has been discussed here extensively. Try searching.

+1 we are more than happy to help but most users will look past your post just because there are 7 of them.  I know I did smile

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website