SoliForum - 3D Printing Community — Extruder Temperatur Reset

Re: Extruder Temperatur Reset

null@example.com (wardjr) — Wed, 23 Apr 2014 15:29:39 +0000

elmoret wrote:

7 threads on the same issue is a bit much.
By the way, your problem has been discussed here extensively. Try searching.

+1 we are more than happy to help but most users will look past your post just because there are 7 of them. I know I did

Re: Extruder Temperatur Reset

null@example.com (elmoret) — Wed, 23 Apr 2014 15:23:45 +0000

7 threads on the same issue is a bit much.

By the way, your problem has been discussed here extensively. Try searching.

Extruder Temperatur Reset

null@example.com (roman) — Wed, 23 Apr 2014 14:03:26 +0000

Hi@all
Sorry first for my bad english. I got a Problem with my Solibaby..:-(

I got a solidoodle 3. Now i got a strange Problem.
I am able to warm up my Extruder to the preset max Temperatur.
I use Slicer.
When i start to print, the Extruder Temp goes down to 25 Degrees. But the Extruder button on the Repetrier Host Program still lights.
I already update the Repetier Host, but i got still the same problem in all Versions.
Now i think its a Slicer Setting Prolem or a Hardware Problem.

Do anybody have an Idea, why i got this Problem?

Best Regards
Roman