You are not logged in. Please login or register.
SoliForum - 3D Printing Community → XYZ Printing DaVinci → Davinci 10 A
Hi Guy's
I am having a problem with the filament feeding through my e3d nozzle the aluminum pinch wheel that pinches the filament keeps freezing up i have had it off cleaned it and lubed it but still the same condition is there a replacement for it where could i find one thanks.
Dennis
I found the stock extruder severly lacking with an E3D and eventually replaced it with this ..... https://www.thingiverse.com/thing:1723817
No more feed issues since and prints flexibles great.
you faced the same thing i am finding no replacement and not many options i will give the up grade a try but the reason i am looking for a fix is that my extruder pinch wheel is sticking so don't know how i am going to print these parts thanks for the info.
If you live in the uk, I'd be happy to print the parts for you.
thank you for your kind offer but i am in the USA west coast
I use this on my Jr. It works great. No more slipping filament.
https://www.amazon.com/Anycubic-Aluminu … B018QPUTBU
MJF55
that one looks like the one on thingiverse i managed to cobble my printer together and print those parts i'll see how they work out and if they don't i will give that one a try i just ordered the bearing for it so that's why i want to try it at least, question did you have to adjust the filament feed rate reason i ask is i see that unit comes with a new feed gear thanks
MJF55
that one looks like the one on thingiverse i managed to cobble my printer together and print those parts i'll see how they work out and if they don't i will give that one a try i just ordered the bearing for it so that's why i want to try it at least, question did you have to adjust the filament feed rate reason i ask is i see that unit comes with a new feed gear thanks
Note that I have a Jr, but I just slapped it together and went. No changes necessary as I used my old stepper motor. Now you do have to pay attention to left and right models, otherwise you will need to rewire the stepper motor connector.
If you go this route, let me know if you have any questions.
mjf55
Thanks i am now waiting for a bearing ordered it on ebay just a couple of bucks but i have to wait 9 days to get it.
mjf55
I just wanted to say thanks for turning me on to that extruder setup from thingivese finally got it running and it's works just great thanks for the help.
I'm a big fan of Dan Brown and I read almost all of his novels. Recently I read The Da Vinci Code (actually I read it online on RYP ebook), I have one question, is all recommended about him true?
I'm a big fan of Dan Brown and I read almost all of his novels. Recently I read The Da Vinci Code (actually I read it online on RYP ebook), I have one question, is all recommended about him true?
Hilarious. 
Nothing like a little spam at dinner time LOL
SoliForum - 3D Printing Community → XYZ Printing DaVinci → Davinci 10 A
Powered by PunBB, supported by Informer Technologies, Inc.
