<![CDATA[SoliForum - 3D Printing Community — Davinci 10 A]]> https://www.soliforum.com/topic/16685/davinci-10-a/ Sun, 17 Sep 2017 19:14:08 +0000 PunBB <![CDATA[Re: Davinci 10 A]]> https://www.soliforum.com/post/138177/#p138177 Nothing like a little spam at dinner time LOL

]]> Sun, 17 Sep 2017 19:14:08 +0000 https://www.soliforum.com/post/138177/#p138177 <![CDATA[Re: Davinci 10 A]]> https://www.soliforum.com/post/137987/#p137987 clannad wrote:

I'm a big fan of Dan Brown and I read almost all of his novels. Recently I read The Da Vinci Code (actually I read it online on RYP ebook), I have one question, is all recommended about him true?

Hilarious. roll

]]> Wed, 13 Sep 2017 09:35:00 +0000 https://www.soliforum.com/post/137987/#p137987 <![CDATA[Re: Davinci 10 A]]> https://www.soliforum.com/post/137986/#p137986 I'm a big fan of Dan Brown and I read almost all of his novels. Recently I read The Da Vinci Code (actually I read it online on RYP ebook), I have one question, is all recommended about him true?

]]> Wed, 13 Sep 2017 09:27:42 +0000 https://www.soliforum.com/post/137986/#p137986 <![CDATA[Re: Davinci 10 A]]> https://www.soliforum.com/post/137859/#p137859 mjf55
I just wanted to say thanks for turning me on to that extruder setup from thingivese finally got it running and it's works just great thanks for the help.

]]> Fri, 08 Sep 2017 21:21:31 +0000 https://www.soliforum.com/post/137859/#p137859 <![CDATA[Re: Davinci 10 A]]> https://www.soliforum.com/post/137557/#p137557 mjf55
Thanks i am now waiting for a bearing ordered it on ebay just a couple of bucks but i have to wait 9 days to get it.

]]> Wed, 30 Aug 2017 16:31:13 +0000 https://www.soliforum.com/post/137557/#p137557 <![CDATA[Re: Davinci 10 A]]> https://www.soliforum.com/post/137540/#p137540 jamerfut wrote:

MJF55
that one looks like the one on thingiverse i managed to cobble my printer together and print those parts i'll see how they work out and if they don't i will give that one a try i just ordered the bearing for it so that's why i want to try it at least, question did you have to adjust the filament feed rate reason i ask is i see that unit comes with a new feed gear thanks

Note that I have a Jr, but I just slapped it together and went.  No changes necessary as I used my old stepper motor.  Now you do have to pay attention to left and right models, otherwise you will need to rewire the stepper motor connector. 

If you go this route, let me know if you have any questions.

]]> Tue, 29 Aug 2017 15:59:37 +0000 https://www.soliforum.com/post/137540/#p137540 <![CDATA[Re: Davinci 10 A]]> https://www.soliforum.com/post/137539/#p137539 MJF55
that one looks like the one on thingiverse i managed to cobble my printer together and print those parts i'll see how they work out and if they don't i will give that one a try i just ordered the bearing for it so that's why i want to try it at least, question did you have to adjust the filament feed rate reason i ask is i see that unit comes with a new feed gear thanks

]]> Tue, 29 Aug 2017 15:51:19 +0000 https://www.soliforum.com/post/137539/#p137539 <![CDATA[Re: Davinci 10 A]]> https://www.soliforum.com/post/137521/#p137521 I use this on my Jr.  It works great.  No more slipping filament. 
https://www.amazon.com/Anycubic-Aluminu … B018QPUTBU

]]> Mon, 28 Aug 2017 23:27:35 +0000 https://www.soliforum.com/post/137521/#p137521 <![CDATA[Re: Davinci 10 A]]> https://www.soliforum.com/post/137517/#p137517 thank you for your kind offer but i am in the USA west coast

]]> Mon, 28 Aug 2017 21:12:36 +0000 https://www.soliforum.com/post/137517/#p137517 <![CDATA[Re: Davinci 10 A]]> https://www.soliforum.com/post/137511/#p137511 If you live in the uk, I'd be happy to print the parts for you.

]]> Mon, 28 Aug 2017 17:06:06 +0000 https://www.soliforum.com/post/137511/#p137511 <![CDATA[Re: Davinci 10 A]]> https://www.soliforum.com/post/137509/#p137509 you faced the same thing i am finding no replacement and not many options i will give the up grade a try but the reason i am looking for a fix is that my extruder pinch wheel is sticking so don't know how i am going to print these parts thanks for the info.

]]> Mon, 28 Aug 2017 16:55:29 +0000 https://www.soliforum.com/post/137509/#p137509 <![CDATA[Re: Davinci 10 A]]> https://www.soliforum.com/post/137500/#p137500 I found the stock extruder severly lacking with an E3D and eventually replaced it with this ..... https://www.thingiverse.com/thing:1723817
No more feed issues since and prints flexibles great.

]]> Mon, 28 Aug 2017 05:56:48 +0000 https://www.soliforum.com/post/137500/#p137500 <![CDATA[Davinci 10 A]]> https://www.soliforum.com/post/137490/#p137490 Hi Guy's
I am having a problem with the filament feeding through my e3d nozzle the aluminum pinch wheel that pinches the filament keeps freezing up i have had it off cleaned it and lubed it but still the same condition is there a replacement for it where could i find one thanks.


Dennis

]]> Sun, 27 Aug 2017 23:12:27 +0000 https://www.soliforum.com/post/137490/#p137490