1 Topic by jamerfut

  • jamerfut
  • Member
  • Offline
  • Registered: 2015-05-06
  • Posts: 51

Topic: Davinci 10 A

Hi Guy's
I am having a problem with the filament feeding through my e3d nozzle the aluminum pinch wheel that pinches the filament keeps freezing up i have had it off cleaned it and lubed it but still the same condition is there a replacement for it where could i find one thanks.


Dennis

2 Reply by scobo

  • scobo
  • scobo
  • Member
  • Offline
  • From: Scotland - UK
  • Registered: 2014-08-09
  • Posts: 993

Re: Davinci 10 A

I found the stock extruder severly lacking with an E3D and eventually replaced it with this ..... https://www.thingiverse.com/thing:1723817
No more feed issues since and prints flexibles great.

Davinci 1.0 with repetier firmware & E3D V6 Lite
Anycubic Photon DLP printer, Einscan-S 3D scanner
Simplify3d, 123D Design, Meshmixer
http://www.thingiverse.com/scobo/designs

3 Reply by jamerfut

  • jamerfut
  • Member
  • Offline
  • Registered: 2015-05-06
  • Posts: 51

Re: Davinci 10 A

you faced the same thing i am finding no replacement and not many options i will give the up grade a try but the reason i am looking for a fix is that my extruder pinch wheel is sticking so don't know how i am going to print these parts thanks for the info.

4 Reply by scobo

  • scobo
  • scobo
  • Member
  • Offline
  • From: Scotland - UK
  • Registered: 2014-08-09
  • Posts: 993

Re: Davinci 10 A

If you live in the uk, I'd be happy to print the parts for you.

Davinci 1.0 with repetier firmware & E3D V6 Lite
Anycubic Photon DLP printer, Einscan-S 3D scanner
Simplify3d, 123D Design, Meshmixer
http://www.thingiverse.com/scobo/designs

5 Reply by jamerfut

  • jamerfut
  • Member
  • Offline
  • Registered: 2015-05-06
  • Posts: 51

Re: Davinci 10 A

thank you for your kind offer but i am in the USA west coast

6 Reply by mjf55

  • mjf55
  • Member
  • Offline
  • From: Raleigh, NC
  • Registered: 2017-06-01
  • Posts: 336

Re: Davinci 10 A

I use this on my Jr.  It works great.  No more slipping filament. 
https://www.amazon.com/Anycubic-Aluminu … B018QPUTBU

7 Reply by jamerfut

  • jamerfut
  • Member
  • Offline
  • Registered: 2015-05-06
  • Posts: 51

Re: Davinci 10 A

MJF55
that one looks like the one on thingiverse i managed to cobble my printer together and print those parts i'll see how they work out and if they don't i will give that one a try i just ordered the bearing for it so that's why i want to try it at least, question did you have to adjust the filament feed rate reason i ask is i see that unit comes with a new feed gear thanks

8 Reply by mjf55

  • mjf55
  • Member
  • Offline
  • From: Raleigh, NC
  • Registered: 2017-06-01
  • Posts: 336

Re: Davinci 10 A

jamerfut wrote:

MJF55
that one looks like the one on thingiverse i managed to cobble my printer together and print those parts i'll see how they work out and if they don't i will give that one a try i just ordered the bearing for it so that's why i want to try it at least, question did you have to adjust the filament feed rate reason i ask is i see that unit comes with a new feed gear thanks

Note that I have a Jr, but I just slapped it together and went.  No changes necessary as I used my old stepper motor.  Now you do have to pay attention to left and right models, otherwise you will need to rewire the stepper motor connector. 

If you go this route, let me know if you have any questions.

9 Reply by jamerfut

  • jamerfut
  • Member
  • Offline
  • Registered: 2015-05-06
  • Posts: 51

Re: Davinci 10 A

mjf55
Thanks i am now waiting for a bearing ordered it on ebay just a couple of bucks but i have to wait 9 days to get it.

10 Reply by jamerfut

  • jamerfut
  • Member
  • Offline
  • Registered: 2015-05-06
  • Posts: 51

Re: Davinci 10 A

mjf55
I just wanted to say thanks for turning me on to that extruder setup from thingivese finally got it running and it's works just great thanks for the help.

11 Reply by clannad

  • clannad
  • Banned
  • Offline
  • Registered: 2017-09-13
  • Posts: 1

Re: Davinci 10 A

I'm a big fan of Dan Brown and I read almost all of his novels. Recently I read The Da Vinci Code (actually I read it online on RYP ebook), I have one question, is all recommended about him true?

12 Reply by scobo

  • scobo
  • scobo
  • Member
  • Offline
  • From: Scotland - UK
  • Registered: 2014-08-09
  • Posts: 993

Re: Davinci 10 A

clannad wrote:

I'm a big fan of Dan Brown and I read almost all of his novels. Recently I read The Da Vinci Code (actually I read it online on RYP ebook), I have one question, is all recommended about him true?

Hilarious. roll

Davinci 1.0 with repetier firmware & E3D V6 Lite
Anycubic Photon DLP printer, Einscan-S 3D scanner
Simplify3d, 123D Design, Meshmixer
http://www.thingiverse.com/scobo/designs

13 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: Davinci 10 A

Nothing like a little spam at dinner time LOL

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura