1 Topic by switchblade5984

  • switchblade5984
  • Member
  • Offline
  • Registered: 2015-09-05
  • Posts: 85

Topic: Hoping someone can help me out a little

Had a hard drive crash, and it seems the settings ini for slicer/rh on the solidoodle page is gone.
was hoping that someone would be willing to export their settings for me.  using the export config bundle option,  I am using a solidoodle 3.  thank you for your help.

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Hoping someone can help me out a little

switchblade5984 wrote:

Had a hard drive crash, and it seems the settings ini for slicer/rh on the solidoodle page is gone.
was hoping that someone would be willing to export their settings for me.  using the export config bundle option,  I am using a solidoodle 3.  thank you for your help.


The settings might be close, but not the same. you will get close but will still need to tune it to your machine as every machine is different and there is no one single profile/ini. I don't have that printer but I have dealt with them long enough.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by AZERATE

  • AZERATE
  • AZERATE
  • PRINTiT
  • Offline
  • From: Chicago
  • Registered: 2013-11-28
  • Posts: 2,077

Re: Hoping someone can help me out a little

OP- Please correct me if I am wrong, but you did upgrade to the E3D last fall, correct?
If so, I can give you some ballpark figures.

Printit Mason and Printit Horizon printers
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!

4 Reply by switchblade5984

  • switchblade5984
  • Member
  • Offline
  • Registered: 2015-09-05
  • Posts: 85

Re: Hoping someone can help me out a little

yes I upgraded to the Lite last year, the solidoodle links for the "setup ini"s are all gone/broken  from the soliwiki  link back to the solidoodle site.

5 Reply by lobosolo

  • lobosolo
  • Member
  • Offline
  • Registered: 2012-08-21
  • Posts: 65

Re: Hoping someone can help me out a little

here is a link to the original ini files from the solidoodle web site when it was up. I used these to setup my modified SD2/3.

https://drive.google.com/file/d/0B7D6Is … sp=sharing

6 Reply by switchblade5984

  • switchblade5984
  • Member
  • Offline
  • Registered: 2015-09-05
  • Posts: 85

Re: Hoping someone can help me out a little

Awesome thanks LOBO