SoliForum - 3D Printing Community — Hoping someone can help me out a little

Re: Hoping someone can help me out a little

null@example.com (switchblade5984) — Wed, 18 May 2016 23:28:29 +0000

Awesome thanks LOBO

Re: Hoping someone can help me out a little

null@example.com (lobosolo) — Tue, 17 May 2016 15:39:40 +0000

here is a link to the original ini files from the solidoodle web site when it was up. I used these to setup my modified SD2/3.

https://drive.google.com/file/d/0B7D6Is … sp=sharing

Re: Hoping someone can help me out a little

null@example.com (switchblade5984) — Thu, 12 May 2016 18:54:40 +0000

yes I upgraded to the Lite last year, the solidoodle links for the "setup ini"s are all gone/broken from the soliwiki link back to the solidoodle site.

Re: Hoping someone can help me out a little

null@example.com (AZERATE) — Fri, 06 May 2016 23:04:30 +0000

OP- Please correct me if I am wrong, but you did upgrade to the E3D last fall, correct?
If so, I can give you some ballpark figures.

Re: Hoping someone can help me out a little

null@example.com (carl_m1968) — Fri, 06 May 2016 23:01:49 +0000

switchblade5984 wrote:

Had a hard drive crash, and it seems the settings ini for slicer/rh on the solidoodle page is gone.
was hoping that someone would be willing to export their settings for me. using the export config bundle option, I am using a solidoodle 3. thank you for your help.

The settings might be close, but not the same. you will get close but will still need to tune it to your machine as every machine is different and there is no one single profile/ini. I don't have that printer but I have dealt with them long enough.

Hoping someone can help me out a little

null@example.com (switchblade5984) — Fri, 06 May 2016 19:42:11 +0000

Had a hard drive crash, and it seems the settings ini for slicer/rh on the solidoodle page is gone.
was hoping that someone would be willing to export their settings for me. using the export config bundle option, I am using a solidoodle 3. thank you for your help.