26 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: SD3 Repetier stops print due to temperature ~>215C

http://soliforum.com/i/?x1mv6MG.png

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

27 Reply by joepayette

  • joepayette
  • Member
  • Offline
  • From: Louisville, KY
  • Registered: 2015-06-28
  • Posts: 72

Re: SD3 Repetier stops print due to temperature ~>215C

thanks, tried that, but I nus have done it wrong

SD3 added E3DV6 and the Titan
still a rookie newbie, but learning.
Dreaming on building a large format from scratch

28 Reply by joepayette

  • joepayette
  • Member
  • Offline
  • From: Louisville, KY
  • Registered: 2015-06-28
  • Posts: 72

Re: SD3 Repetier stops print due to temperature ~>215C

just saw the screen shot, ignore last post.....working on it

Joe

SD3 added E3DV6 and the Titan
still a rookie newbie, but learning.
Dreaming on building a large format from scratch