26 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: SD4 with 2 extruders?!?

105 - 110

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

27 Reply by patrick.w.york

  • patrick.w.york
  • Member
  • Offline
  • Registered: 2015-01-15
  • Posts: 51

Re: SD4 with 2 extruders?!?

Thanks. I will get me a piece of glass and some hairspray after work and try this out.

28 Reply by patrick.w.york

  • patrick.w.york
  • Member
  • Offline
  • Registered: 2015-01-15
  • Posts: 51

Re: SD4 with 2 extruders?!?

How often do I need to hairspray? before each print or after 2-3?

29 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: SD4 with 2 extruders?!?

About every 10 prints tops

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

30 Reply by patrick.w.york

  • patrick.w.york
  • Member
  • Offline
  • Registered: 2015-01-15
  • Posts: 51

Re: SD4 with 2 extruders?!?

Everything worked perfect after adding glass plate with kapton and hairspray. Here is my first print. It is about the size of a pingpong ball and took about 45 mins to print.

Post's attachments

Skull.jpg
Skull.jpg 897.74 kb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.

31 Reply by Morganism

  • Morganism
  • Member
  • Offline
  • Registered: 2015-01-19
  • Posts: 133

Re: SD4 with 2 extruders?!?

If this was done purpose as a customer service issue to compensate for your wait, it is brilliant. Excellent move, and would go a long way to changing Solidoodle's reputation for bad customer service. If it wasn't done on purpose, it should have been--for everyone who has had to wait months.

Solidoodle 4-Mostly stock running off headless Raspberry Pi with Octoprint