<![CDATA[SoliForum - 3D Printing Community — SD4 with 2 extruders?!?]]> https://www.soliforum.com/topic/10284/sd4-with-2-extruders/ Sat, 07 Mar 2015 04:51:45 +0000 PunBB <![CDATA[Re: SD4 with 2 extruders?!?]]> https://www.soliforum.com/post/88669/#p88669 If this was done purpose as a customer service issue to compensate for your wait, it is brilliant. Excellent move, and would go a long way to changing Solidoodle's reputation for bad customer service. If it wasn't done on purpose, it should have been--for everyone who has had to wait months.

]]> Sat, 07 Mar 2015 04:51:45 +0000 https://www.soliforum.com/post/88669/#p88669 <![CDATA[Re: SD4 with 2 extruders?!?]]> https://www.soliforum.com/post/88642/#p88642 Everything worked perfect after adding glass plate with kapton and hairspray. Here is my first print. It is about the size of a pingpong ball and took about 45 mins to print.

]]> Sat, 07 Mar 2015 00:07:39 +0000 https://www.soliforum.com/post/88642/#p88642 <![CDATA[Re: SD4 with 2 extruders?!?]]> https://www.soliforum.com/post/88628/#p88628 About every 10 prints tops

]]> Fri, 06 Mar 2015 23:16:58 +0000 https://www.soliforum.com/post/88628/#p88628 <![CDATA[Re: SD4 with 2 extruders?!?]]> https://www.soliforum.com/post/88624/#p88624 How often do I need to hairspray? before each print or after 2-3?

]]> Fri, 06 Mar 2015 22:58:35 +0000 https://www.soliforum.com/post/88624/#p88624 <![CDATA[Re: SD4 with 2 extruders?!?]]> https://www.soliforum.com/post/88579/#p88579 Thanks. I will get me a piece of glass and some hairspray after work and try this out.

]]> Fri, 06 Mar 2015 16:11:18 +0000 https://www.soliforum.com/post/88579/#p88579 <![CDATA[Re: SD4 with 2 extruders?!?]]> https://www.soliforum.com/post/88576/#p88576 105 - 110

]]> Fri, 06 Mar 2015 15:37:42 +0000 https://www.soliforum.com/post/88576/#p88576 <![CDATA[Re: SD4 with 2 extruders?!?]]> https://www.soliforum.com/post/88569/#p88569 Roger that. I will give it a try. Thanks. So with the glass method, what temperature is best to run my bed? I was gradually bumping it up up up trying to get it to not lift. But with the glass and an adhesive I would assume I can run it cooler. For the record I got my best print on some roughed up kapton (sanded with 220 grit) and my bed temp at 105.

]]> Fri, 06 Mar 2015 14:40:01 +0000 https://www.soliforum.com/post/88569/#p88569 <![CDATA[Re: SD4 with 2 extruders?!?]]> https://www.soliforum.com/post/88565/#p88565 Aquanet on glass is the way to go. The purple can is extreme hold...good stuff

]]> Fri, 06 Mar 2015 14:05:13 +0000 https://www.soliforum.com/post/88565/#p88565 <![CDATA[Re: SD4 with 2 extruders?!?]]> https://www.soliforum.com/post/88562/#p88562 Sadly I had lifting problems. I got it to print up about 1/4" before it completely lifted off the plate. I need to get some acetone to make some juice or some hairspray. I will do that on my way home from work today.

The portion that did print was pretty smooth even at a 3mm setting and the layering looked good though.

]]> Fri, 06 Mar 2015 13:49:27 +0000 https://www.soliforum.com/post/88562/#p88562 <![CDATA[Re: SD4 with 2 extruders?!?]]> https://www.soliforum.com/post/88532/#p88532 How did it turn out? Pics?

]]> Fri, 06 Mar 2015 04:16:54 +0000 https://www.soliforum.com/post/88532/#p88532 <![CDATA[Re: SD4 with 2 extruders?!?]]> https://www.soliforum.com/post/88483/#p88483 So I've got my frankindoodle printing its first item. It is just some random skull I found on thingiverse. After I am sure it is all working right I will have to look at the 2 extruder printing.

]]> Thu, 05 Mar 2015 22:06:49 +0000 https://www.soliforum.com/post/88483/#p88483 <![CDATA[Re: SD4 with 2 extruders?!?]]> https://www.soliforum.com/post/88468/#p88468 jagowilson wrote:

Next up is the Solidoodle workbench press apprentice 4

LOL

]]> Thu, 05 Mar 2015 20:39:40 +0000 https://www.soliforum.com/post/88468/#p88468 <![CDATA[Re: SD4 with 2 extruders?!?]]> https://www.soliforum.com/post/88456/#p88456 Next up is the Solidoodle workbench press apprentice 4

]]> Thu, 05 Mar 2015 19:03:26 +0000 https://www.soliforum.com/post/88456/#p88456 <![CDATA[Re: SD4 with 2 extruders?!?]]> https://www.soliforum.com/post/88454/#p88454 Nice!

]]> Thu, 05 Mar 2015 18:41:54 +0000 https://www.soliforum.com/post/88454/#p88454 <![CDATA[Re: SD4 with 2 extruders?!?]]> https://www.soliforum.com/post/88453/#p88453 Wow.

]]> Thu, 05 Mar 2015 18:32:39 +0000 https://www.soliforum.com/post/88453/#p88453