1 Topic by Annoying guest

  • Annoying guest
  • Newbie
  • Offline
  • Registered: 2014-12-28
  • Posts: 3

Topic: E3dv6 Z height changes SD4

So this might be a really stupid question... 

I am in the process of upgrading to the E3d and thanks to you guys I am mostly done i just finished the firmware update but I need to change to height of the SD4 to accommodate the length of the extruder

I have been messing with the repitier settings but can't seem to get it right If one of you could point me in the right direction

2 Reply by IronMan

  • IronMan
  • IronMan
  • PRINTiT
  • Offline
  • From: SC
  • Registered: 2012-09-14
  • Posts: 1,269

Re: E3dv6 Z height changes SD4

Adjust the Z-stop screw at the back to hit the limit switch sooner to provide more height for the hot end.  If you can't extend it enough, try putting the screw in backwards or relocating the bracket...

SD2 - Stock - Enclosure - Heated Bed - Glass Plate - Auto Fire Extinguisher
Ord Bot Hadron - RAMPS 1.4 - Bulldog XL - E3D v6 - 10" x 10" PCB Heated Build w/SSR - Glass Plate
Thanks for All of Your Help!

3 Reply by Annoying guest

  • Annoying guest
  • Newbie
  • Offline
  • Registered: 2014-12-28
  • Posts: 3

Re: E3dv6 Z height changes SD4

ahhhh I see now thank you

4 Reply by jagowilson (edited by jagowilson 2015-01-11 17:38:35)

  • jagowilson
  • PRINTiT
  • Offline
  • Registered: 2014-09-14
  • Posts: 1,701

Re: E3dv6 Z height changes SD4

You can also print and install this once you're up and running. It's much easier than the stock one because you won't have to flip the screw...

http://www.thingiverse.com/thing:550713

If I recall you PMd me. Glad it was helpful.

5 Reply by Annoying guest

  • Annoying guest
  • Newbie
  • Offline
  • Registered: 2014-12-28
  • Posts: 3

Re: E3dv6 Z height changes SD4

Indeed you guys have been a huge help