<![CDATA[SoliForum - 3D Printing Community — E3dv6 Z height changes SD4]]> https://www.soliforum.com/topic/9136/e3dv6-z-height-changes-sd4/ Sun, 11 Jan 2015 17:48:50 +0000 PunBB <![CDATA[Re: E3dv6 Z height changes SD4]]> https://www.soliforum.com/post/78474/#p78474 Indeed you guys have been a huge help

]]> Sun, 11 Jan 2015 17:48:50 +0000 https://www.soliforum.com/post/78474/#p78474 <![CDATA[Re: E3dv6 Z height changes SD4]]> https://www.soliforum.com/post/78473/#p78473 You can also print and install this once you're up and running. It's much easier than the stock one because you won't have to flip the screw...

http://www.thingiverse.com/thing:550713

If I recall you PMd me. Glad it was helpful.

]]> Sun, 11 Jan 2015 17:38:06 +0000 https://www.soliforum.com/post/78473/#p78473 <![CDATA[Re: E3dv6 Z height changes SD4]]> https://www.soliforum.com/post/78471/#p78471 ahhhh I see now thank you

]]> Sun, 11 Jan 2015 17:05:42 +0000 https://www.soliforum.com/post/78471/#p78471 <![CDATA[Re: E3dv6 Z height changes SD4]]> https://www.soliforum.com/post/78450/#p78450 Adjust the Z-stop screw at the back to hit the limit switch sooner to provide more height for the hot end.  If you can't extend it enough, try putting the screw in backwards or relocating the bracket...

]]> Sun, 11 Jan 2015 11:11:27 +0000 https://www.soliforum.com/post/78450/#p78450 <![CDATA[E3dv6 Z height changes SD4]]> https://www.soliforum.com/post/78449/#p78449 So this might be a really stupid question... 

I am in the process of upgrading to the E3d and thanks to you guys I am mostly done i just finished the firmware update but I need to change to height of the SD4 to accommodate the length of the extruder

I have been messing with the repitier settings but can't seem to get it right If one of you could point me in the right direction

]]> Sun, 11 Jan 2015 10:38:24 +0000 https://www.soliforum.com/post/78449/#p78449