251 Reply by Stevos758

  • Stevos758
  • Member
  • Offline
  • Registered: 2013-04-22
  • Posts: 502

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

Good! Hopefully it will work for both! Im sick of cramming things in there to make it work! LOL!

Website - http://rippsgaragetech.com/
Facebook - https://www.facebook.com/pages/Ripps-Ga … 3131469591
E3D V6 Bulldog XL mounts! http://www.filastruder.com/products/e3dv6-bulldog-mount

252 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

So notice the height of the groove mount on the V6.

http://i.imgur.com/EPFNLzn.jpg


It is difficult to see so I circled it but this is a V5 mounted to the Bulldog.  I used a piece of SS safety tie wire in the shaper of a "U" to take up the gap.

http://i.imgur.com/8N3FUkq.jpg?1

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

253 Reply by wardjr (edited by wardjr 2014-12-08 20:13:28)

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

Stevos758 wrote:

Good! Hopefully it will work for both! Im sick of cramming things in there to make it work! LOL!

It'll work for both.

edit: It will work for both but not as well as I would like.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

254 Reply by Stevos758

  • Stevos758
  • Member
  • Offline
  • Registered: 2013-04-22
  • Posts: 502

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

These drawings say the V6 is bigger yet? Why did they do that if the V5 was already bigger that standard mounts?

Post's attachments

E3D_Heat_Sink.jpg
E3D_Heat_Sink.jpg 639.38 kb, file has never been downloaded. 

V6-175-SINK.pdf 80.87 kb, 11 downloads since 2014-11-24 

You don't have the permssions to download the attachments of this post.
Website - http://rippsgaragetech.com/
Facebook - https://www.facebook.com/pages/Ripps-Ga … 3131469591
E3D V6 Bulldog XL mounts! http://www.filastruder.com/products/e3dv6-bulldog-mount

255 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

wardjr wrote:
Stevos758 wrote:

Good! Hopefully it will work for both! Im sick of cramming things in there to make it work! LOL!

It'll work for both.

Maybe spoke too soon there is .43mm difference between the two.
V5 is 5.51
V6 is 5.94

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

256 Reply by Stevos758

  • Stevos758
  • Member
  • Offline
  • Registered: 2013-04-22
  • Posts: 502

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

Well, No worries. Easy enough to change that part if needed.

Website - http://rippsgaragetech.com/
Facebook - https://www.facebook.com/pages/Ripps-Ga … 3131469591
E3D V6 Bulldog XL mounts! http://www.filastruder.com/products/e3dv6-bulldog-mount

257 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

Stevos758 wrote:

These drawings say the V6 is bigger yet? Why did they do that if the V5 was already bigger that standard mounts?

At least the diameter is the same and I can think of a lot of ways to deal with .43.  Plus it doesn't matter so long as the top of the heat sink gets pushed up against the rest of the bulldog.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

258 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

Stevos758 wrote:

Well, No worries. Easy enough to change that part if needed.

My preliminary measurements tell me that making that fit correctly for the V5 will also work for a V6.  There is a slight chance that the very top of the V6 could stick out slightly.  Until I try it I won't know for sure if that will really affect anything.  If it is a problem I don't see why a few seconds with some sandpaper on a flat surface couldn't solve it.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

259 Reply by elmoret

  • elmoret
  • Filastruder
  • Offline
  • Registered: 2012-10-11
  • Posts: 6,048

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

I think they had to change the groove mount by the half a millimeter for the embedded coupling, though I'm not certain.

Filastruder - the robust, inexpensive filament extruder
E3Dv6 All Metal Hotend - the premier 3D printing hotend

260 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

elmoret wrote:

I think they had to change the groove mount by the half a millimeter for the embedded coupling, though I'm not certain.

That would make sense.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

261 Reply by IronMan

  • IronMan
  • IronMan
  • PRINTiT
  • Offline
  • From: SC
  • Registered: 2012-09-14
  • Posts: 1,269

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

I remember why this was not an issue for me; I machined a small aluminum yoke to act as a better filament guide incorporating the PTFE tubing.  I used the thickness of the aluminum rim to offset any play in the fit...

http://i.imgur.com/wUuyxLo.jpg

SD2 - Stock - Enclosure - Heated Bed - Glass Plate - Auto Fire Extinguisher
Ord Bot Hadron - RAMPS 1.4 - Bulldog XL - E3D v6 - 10" x 10" PCB Heated Build w/SSR - Glass Plate
Thanks for All of Your Help!

262 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

Oh yeah, I remember seeing that.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

263 Reply by Stevos758 (edited by Stevos758 2014-11-26 18:14:12)

  • Stevos758
  • Member
  • Offline
  • Registered: 2013-04-22
  • Posts: 502

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

Ok! So he says they will be done today! He is making 6 only. So that leaves 5 left.

Wardjr, Mloebl, Galinsky. Please confirm if you want one still? PM me if so. I can get them shipped out Friday.

How does $40 shipped sound?

I'll get some pics as soon as I have them in hand.

Website - http://rippsgaragetech.com/
Facebook - https://www.facebook.com/pages/Ripps-Ga … 3131469591
E3D V6 Bulldog XL mounts! http://www.filastruder.com/products/e3dv6-bulldog-mount

264 Reply by Stevos758

  • Stevos758
  • Member
  • Offline
  • Registered: 2013-04-22
  • Posts: 502

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

Also I think I'll get on my lathe soonish and whip up a spacer like that! Nice job Iron Man!

Website - http://rippsgaragetech.com/
Facebook - https://www.facebook.com/pages/Ripps-Ga … 3131469591
E3D V6 Bulldog XL mounts! http://www.filastruder.com/products/e3dv6-bulldog-mount

265 Reply by IronMan (edited by IronMan 2014-11-26 18:55:05)

  • IronMan
  • IronMan
  • PRINTiT
  • Offline
  • From: SC
  • Registered: 2012-09-14
  • Posts: 1,269

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

Thanks!

Here is the drawing to get you started...sorry, for some reason the radius did not register for dimensioning, but I ended up just grinding that in by hand!

Cheers!

EDIT:  And Dimensions are in inches tongue

Post's attachments

Bulldog Bottom Plug for E3D v6.PDF 49.67 kb, 17 downloads since 2014-11-26 

You don't have the permssions to download the attachments of this post.
SD2 - Stock - Enclosure - Heated Bed - Glass Plate - Auto Fire Extinguisher
Ord Bot Hadron - RAMPS 1.4 - Bulldog XL - E3D v6 - 10" x 10" PCB Heated Build w/SSR - Glass Plate
Thanks for All of Your Help!

266 Reply by Stevos758

  • Stevos758
  • Member
  • Offline
  • Registered: 2013-04-22
  • Posts: 502

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

Thanks kind sir! I think I'm just going to run it with a 1.75mm hole. I dont need the PTFE on the V5. Ill post my drawings when I get to it.

Website - http://rippsgaragetech.com/
Facebook - https://www.facebook.com/pages/Ripps-Ga … 3131469591
E3D V6 Bulldog XL mounts! http://www.filastruder.com/products/e3dv6-bulldog-mount

267 Reply by Stevos758

  • Stevos758
  • Member
  • Offline
  • Registered: 2013-04-22
  • Posts: 502

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

http://i.imgur.com/UBSE6Xw.jpg

Website - http://rippsgaragetech.com/
Facebook - https://www.facebook.com/pages/Ripps-Ga … 3131469591
E3D V6 Bulldog XL mounts! http://www.filastruder.com/products/e3dv6-bulldog-mount

268 Reply by IronMan

  • IronMan
  • IronMan
  • PRINTiT
  • Offline
  • From: SC
  • Registered: 2012-09-14
  • Posts: 1,269

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

Awesome!!  Gotta love good ol' machining!

SD2 - Stock - Enclosure - Heated Bed - Glass Plate - Auto Fire Extinguisher
Ord Bot Hadron - RAMPS 1.4 - Bulldog XL - E3D v6 - 10" x 10" PCB Heated Build w/SSR - Glass Plate
Thanks for All of Your Help!

269 Reply by Stevos758 (edited by Stevos758 2014-11-26 19:34:50)

  • Stevos758
  • Member
  • Offline
  • Registered: 2013-04-22
  • Posts: 502

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

He actually made 8. So 4 are spoken for. 2 more possibly. so 2 left!

I'm sure he will make more if we run out.

NOTE THESE ARE FOR THE V5 ONLY!

I will need to acquire a V6 if you want one of those as well.

Website - http://rippsgaragetech.com/
Facebook - https://www.facebook.com/pages/Ripps-Ga … 3131469591
E3D V6 Bulldog XL mounts! http://www.filastruder.com/products/e3dv6-bulldog-mount

270 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

My intention since I have 2 v5's and one v6 is to see if I can't come up with a quick fix via some sandpaper, friction and the top of the V6 wink

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

271 Reply by Stevos758

  • Stevos758
  • Member
  • Offline
  • Registered: 2013-04-22
  • Posts: 502

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

FITS like a glove!



http://i.imgur.com/YyUjSmm.jpg
http://i.imgur.com/3Bu9PUj.jpg
http://i.imgur.com/EYJGSUQ.jpg
http://i.imgur.com/MCluyxH.jpg

Website - http://rippsgaragetech.com/
Facebook - https://www.facebook.com/pages/Ripps-Ga … 3131469591
E3D V6 Bulldog XL mounts! http://www.filastruder.com/products/e3dv6-bulldog-mount

272 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

Nice work I can hardly wait!

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

273 Reply by michaudtime

  • michaudtime
  • Member
  • Offline
  • From: Anchorage, Alaska
  • Registered: 2013-10-18
  • Posts: 92

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

Oh I want one that fits the v6 please please please.  pm me your pay pal info and how much it is shipped to 99505

Solidoodle 3, Bulldog XL Direct Drive, Well Nut for Z axis, borosilicate glass, E3D V6 Hot end, Custom Encloser, Lawsy Carriages with Linear Bearings and Polished 8mm Chrome rods.

274 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

michaudtime wrote:

Oh I want one that fits the v6 please please please.  pm me your pay pal info and how much it is shipped to 99505

I would think I'd have mine by Monday or Tuesday.  I will let you know what needs to be done to make it fit properly.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

275 Reply by Stevos758

  • Stevos758
  • Member
  • Offline
  • Registered: 2013-04-22
  • Posts: 502

Re: RepRapDiscount "Bulldog XL" Geared Metal Extruder on a Solidoodle 3!

If wardjr cant find a solution I'll pick up a v6 and if 8 people want one I'll see if he wants to do it.

Website - http://rippsgaragetech.com/
Facebook - https://www.facebook.com/pages/Ripps-Ga … 3131469591
E3D V6 Bulldog XL mounts! http://www.filastruder.com/products/e3dv6-bulldog-mount