1 Topic by mrcobra92 (edited by mrcobra92 2014-06-04 23:13:17)

  • mrcobra92
  • Newbie
  • Offline
  • Registered: 2014-06-04
  • Posts: 6

Topic: Y/X Axis Error

Well I just got my printer in the mail, but when I turn it on, I get the buzzing sound and the lights flashing, but now I get a new error that says "Service Call 0031" which is for the Y axis motor that is working fine, every time I start it up it moves just fine, then spits out that error. If I unplug the Y axis motor, it will almost get to the home screen, then it throws up "Service Call 0030" which is for the X axis motor which is also working just fine as I have seen it move. So I am not sure what is wrong, I highly doubt bother motors have issues.

2 Reply by heidkampn1

  • heidkampn1
  • Member
  • Offline
  • Registered: 2014-05-27
  • Posts: 159

Re: Y/X Axis Error

That's usually when an error code displays on the screen. Does the screen light up at all?

3 Reply by mrcobra92

  • mrcobra92
  • Newbie
  • Offline
  • Registered: 2014-06-04
  • Posts: 6

Re: Y/X Axis Error

heidkampn1 wrote:

That's usually when an error code displays on the screen. Does the screen light up at all?

No.

4 Reply by heidkampn1

  • heidkampn1
  • Member
  • Offline
  • Registered: 2014-05-27
  • Posts: 159

Re: Y/X Axis Error

Try this http://www.soliforum.com/topic/6495/how … -easy-fix/

5 Reply by mrcobra92

  • mrcobra92
  • Newbie
  • Offline
  • Registered: 2014-06-04
  • Posts: 6

Re: Y/X Axis Error

Ok, that got the screen working but now I have a new problem. When I start it up, I still get the buzzing and the lights flashing, but now I get a new error that says "Service Call 0031" which is for the Y axis motor that is working fine, every time I start it up it moves just fine, then spits out that error. If I unplug the Y axis motor, it will almost get to the home screen, then it throws up "Service Call 0030" which is for the X axis motor which is also working just fine as I have seen it move. So I am not sure what is wrong, I highly doubt bother motors have issues.

6 Reply by NeedsMoarTurbo

  • NeedsMoarTurbo
  • Newbie
  • Offline
  • Registered: 2014-05-15
  • Posts: 6

Re: Y/X Axis Error

mrcobra92 wrote:

Ok, that got the screen working but now I have a new problem. When I start it up, I still get the buzzing and the lights flashing, but now I get a new error that says "Service Call 0031" which is for the Y axis motor that is working fine, every time I start it up it moves just fine, then spits out that error. If I unplug the Y axis motor, it will almost get to the home screen, then it throws up "Service Call 0030" which is for the X axis motor which is also working just fine as I have seen it move. So I am not sure what is wrong, I highly doubt bother motors have issues.

well, can you see or investigate what exactly is making the buzzing noise? do you have a loose belt so the motor is just spinning away and not moving the belt? perhaps you have a problem with an endstop? could be several things I would take a good look around

7 Reply by mrcobra92

  • mrcobra92
  • Newbie
  • Offline
  • Registered: 2014-06-04
  • Posts: 6

Re: Y/X Axis Error

NeedsMoarTurbo wrote:
mrcobra92 wrote:

Ok, that got the screen working but now I have a new problem. When I start it up, I still get the buzzing and the lights flashing, but now I get a new error that says "Service Call 0031" which is for the Y axis motor that is working fine, every time I start it up it moves just fine, then spits out that error. If I unplug the Y axis motor, it will almost get to the home screen, then it throws up "Service Call 0030" which is for the X axis motor which is also working just fine as I have seen it move. So I am not sure what is wrong, I highly doubt bother motors have issues.

well, can you see or investigate what exactly is making the buzzing noise? do you have a loose belt so the motor is just spinning away and not moving the belt? perhaps you have a problem with an endstop? could be several things I would take a good look around

It's the warning buzzer. I just ended up contacting the seller and am shipping it back for a refund. I am going to just have to wait until a new good deal comes on the market again and hope that one works. I bought this one off ebay, supposedly it was brand new yet it had so manny defects and issues, it looked like it had been dropped off the back of a truck.

8 Reply by moph

  • moph
  • Newbie
  • Offline
  • Registered: 2015-02-02
  • Posts: 2

Re: Y/X Axis Error

I also have an 0030 error - Which means "X-axis movement abnormalities" according to the manual.

Action (according to manual): Check motor/sensor connections. Check sensor position.

The problem is obvious - the plate has gone way up, even bending the moving belt. This hinders the extruder from going left on the X-axis.
The solution is, however not obvious. I can't access the menu to pull down the plate. And I can't find the sensors - exept from the one on the extruder according to a xyzprinting video on the Da Vinci 1.0 (which is almost identical to my Da Vinci 2.0 AiO).

Any ideas?
Thanks.

9 Reply by mitchlandry

  • mitchlandry
  • Newbie
  • Offline
  • Registered: 2014-12-28
  • Posts: 8

Re: Y/X Axis Error

My error 0030 code was due to a short in the x-axis sensor cable assembly. Easy to verify with continuity check w/ multi-meter.
Mine was pinched with cable tie on the y-axis carriage and caused a short.
X-axis sensor is the 3 red wire harness. Y-axis is 3 orange wire harness. Find on mainboard and follow up to sensor locations.
My printer is 1.0A, so colors may be different, but should be easy to identify on mainboard.