1 Topic by MartinFahrer (edited by MartinFahrer 2014-04-22 01:22:43)

  • MartinFahrer
  • Member
  • Offline
  • Registered: 2013-11-07
  • Posts: 49

Topic: Printer won't print after slicing

I'm trying to do a print, printer isn't print after I slice.  Everything is connected I can manually move the print head and board, the bed and extruder are heated. I re downed rep rap I got an error after slicing so I downloaded the lates rep rap and it won't print.  Any thoughts.

I have printed before this happen after I tried to upgrade Slicer.

Post's attachments

8.5 error.JPG
8.5 error.JPG 153.13 kb, file has never been downloaded. 

G Code top.JPG
G Code top.JPG 184.26 kb, file has never been downloaded. 

G Code.JPG
G Code.JPG 195.99 kb, file has never been downloaded. 

Manual screen.JPG
Manual screen.JPG 154.27 kb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.

2 Reply by AZERATE

  • AZERATE
  • AZERATE
  • PRINTiT
  • Offline
  • From: Chicago
  • Registered: 2013-11-28
  • Posts: 2,077

Re: Printer won't print after slicing

35 HOUR PRINT?! lol
When you hit Run Job, is there movement? Judging by the images you uploaded, it seems your bed temp is not reaching the desired setting. If this were to be the case, the print will not start until reaching the desired setting....everything will just stay put.
If motors move and the platform raises but doesn't print, the problem may be the heat.

Can you be a little more specific with the steps you are taking how the printer is reacting?

Printit Mason and Printit Horizon printers
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!

3 Reply by MartinFahrer

  • MartinFahrer
  • Member
  • Offline
  • Registered: 2013-11-07
  • Posts: 49

Re: Printer won't print after slicing

When I hit Run Job it freezes nothing happens then if I try to kill the job or do anything else i get the lovely (Not Responding error).  I know about the bed being hot enough I re tried with the Temp at the matching the setting.  The program freezes up.

4 Reply by MartinFahrer (edited by MartinFahrer 2014-04-22 01:23:23)

  • MartinFahrer
  • Member
  • Offline
  • Registered: 2013-11-07
  • Posts: 49

Re: Printer won't print after slicing

When I run with Solidoodle Rep Rap 8.5 I get the error message captured when I try to slice.  any thoughts? This is with models I have printed before.  I think it is software, the print bed and extruder are hot and the x,y,z axis respond with manual control as well as the extruder.  I changed USB ports too, nothing prints.  I have a job I need to complete on a deadline any thoughts?  I did try to upgrade Slicer earlier that is when the problems started.  I added the picture to the original post  8.5 error.

Any help is greatly appreciated.
Martin

5 Reply by MartinFahrer

  • MartinFahrer
  • Member
  • Offline
  • Registered: 2013-11-07
  • Posts: 49

Re: Printer won't print after slicing

What does "could not find generated G-code file" Mean??

6 Reply by AZERATE

  • AZERATE
  • AZERATE
  • PRINTiT
  • Offline
  • From: Chicago
  • Registered: 2013-11-28
  • Posts: 2,077

Re: Printer won't print after slicing

MartinFahrer wrote:

What does "could not find generated G-code file" Mean??

In my experience, there is something wrong with your current settings in Slic3r. I haven't fiddled with Skeinforge, but I play with settings and experiment constantly and tend to see this.

Printit Mason and Printit Horizon printers
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!

7 Reply by MartinFahrer

  • MartinFahrer
  • Member
  • Offline
  • Registered: 2013-11-07
  • Posts: 49

Re: Printer won't print after slicing

Thank you I figured it out. the filament was set a 3.0 and I changed it to my settings to 1.75  It's slicing now.