You are not logged in. Please login or register.
SoliForum - 3D Printing Community → Help/Repair/Maintenance → Uneven Surface, what's the problem?
Hey, I just solved my issues with top and bottom layers not printing right, now I have to ask why the surface of my prints gets so uneven. I calibrated everything (Z axis offset, extrusion rate and this temperature thing) but the surface is slightly waved. I attached some Photos.
Thanks for your help!
That wavy pattern is what is often referred to as Moire. It is caused by the pulse of the 1/16th micro step of the stepper driver. Basically it pulses as it rotates and causes that pattern. This can be reduced some with proper VREF calibration of the stepper driver. Alternatively you could replace that driver with a 1/32 stepper depending on which board you have this can be a simple and cheap modification. Or you could switch to a geared extruder such as BulldogXL.
I have the sd2 Pro w/o any modifications, do you have some links for this because I don't find it with google?
I have the sd2 Pro w/o any modifications, do you have some links for this because I don't find it with google?
Just use the forum search.... VREF you'll find more info than you need. Also Solidoodle has instructions in their official WIKI.
I adjust mine the way Adrian recommends so pay attention to his posts on the subject.
SoliForum - 3D Printing Community → Help/Repair/Maintenance → Uneven Surface, what's the problem?
Powered by PunBB, supported by Informer Technologies, Inc.
