You are not logged in. Please login or register.
SoliForum - 3D Printing Community → Help/Repair/Maintenance → Spare Electronics
I immediately thought - what if the failure will center plate printer. Have to wait for a new at least a few weeks.
If you buy a set like this: http://www.ebay.com/itm/Sanguinololu-Re … 3ccb76caf7
It can also be used as a spare part? Visually, I carefully compared, differences from the fee which solidudl put on their printer seems to be no.
Yes it will work, but you need the full thing which costs 70 or 100$ (unless you want to do all the soldering yourself). Personally, I would buy a spare ATMega1284 instead (10$, and actually you can also directly replace the 644 that you have and keep that as a spare) and maybe an extra Pololu driver (other 10$) as it's unlikely that you will destroy all of them at the same time.
Soldering is not problem for me.
About a couple of additional drivers i thought also.
After frying mine, I bought a Sanguinolo from Norcal-Reprap on ebay, and it was great.
SoliForum - 3D Printing Community → Help/Repair/Maintenance → Spare Electronics
Powered by PunBB, supported by Informer Technologies, Inc.
