1 Topic by jon_bondy

  • jon_bondy
  • Member
  • Offline
  • Registered: 2012-09-27
  • Posts: 405

Topic: Need latest Repetier settings for Printers

I installed Win8 on top of my old Win7 system, and can no longer find my settings for my Repetier Host Printers.  I looked everywhere for a file that might contain the settings, but was unsuccessful.  Would someone please share those settings (probably best with screen shots)? 

I also do not have any current Slic3r settings (although I did manage to find and preserve my older Slic3r settings).

Thanks!

2 Reply by jefferysanders (edited by jefferysanders 2013-02-15 20:38:30)

  • jefferysanders
  • Banned
  • Offline
  • Registered: 2012-09-04
  • Posts: 309

Re: Need latest Repetier settings for Printers

You can manually setup your profiles at this point I bet 80).  Just look at what each does and fine tune it to your part.  Here is what I focus on.

The most important things to take notice of are nozzle size, extrusion with, retraction settings, layer height, perimeters (I stay around .20 for a balance of quality and speed) -- these all have major impacts on the quality of print.

Infill - I always use concentric on top/bot and honeycomb for the inside.

Perimeters- raise this number if you see holes (assuming you properly fixed your file) -- the lower the Layer Height the more you will need.  You can also sometime use more perimeters instead of turning on support.

Post's attachments

PrinterSettings.ini 2.41 kb, 9 downloads since 2013-02-15 

PrintSettings.ini 2.41 kb, 4 downloads since 2013-02-15 

You don't have the permssions to download the attachments of this post.

3 Reply by nickythegreek

  • nickythegreek
  • Member
  • Offline
  • Registered: 2012-11-18
  • Posts: 673

Re: Need latest Repetier settings for Printers

They can be found here: http://www.solidoodle.com/2012/11/1495/

4 Reply by jon_bondy

  • jon_bondy
  • Member
  • Offline
  • Registered: 2012-09-27
  • Posts: 405

Re: Need latest Repetier settings for Printers

Thanks! 

Sorry.  I meant the definitions of each Printer in Repetier Host, not the Printer definitions in Slic3r.  I can find the Slic3r files just fine.  Things like bed dimensions, dump areas, etc.

5 Reply by nickythegreek

  • nickythegreek
  • Member
  • Offline
  • Registered: 2012-11-18
  • Posts: 673

Re: Need latest Repetier settings for Printers

Ah,

I setup RH on my surface pro 2 days and used this:
http://dl.dropbox.com/u/90605134/setupR … e_0_82.exe