Topic: Solidoodle 2 Power Supply
I broke my 120w standart Power Supply
i have a broken xbox 360 with an powersupply here can i use this?
12V 14,2A
Input AC
200-240~2,5A, 47-63Hz
sould have 170.4 W
is it possible?
Re: Solidoodle 2 Power Supply
i just did this mod and it works verry well !
Re: Solidoodle 2 Power Supply
Hi, i have the same situation with my SD press; I have a xbox power supply but not really sure how to connect it, the xbox has several wires 3 thick yellow and one thinner (yellow) that supouse to be the 12v and 3 thick black and 1 thinner ; the SD press conector has 4 pins, two of them are the 12v but when and 2 de gnd , but when I cut it is only one wire.
Hope i made my self clear, could you advice what you did? thanks
- wardjr
- Moderator
- Offline
Re: Solidoodle 2 Power Supply
userksh14 wrote:
Hi, i have the same situation with my SD press; I have a xbox power supply but not really sure how to connect it, the xbox has several wires 3 thick yellow and one thinner (yellow) that supouse to be the 12v and 3 thick black and 1 thinner ; the SD press conector has 4 pins, two of them are the 12v but when and 2 de gnd , but when I cut it is only one wire.
Hope i made my self clear, could you advice what you did? thanks
The Press is a 24v system so ensure you have the correct PSU.
Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions
Re: Solidoodle 2 Power Supply
wardjr wrote:
userksh14 wrote:Hi, i have the same situation with my SD press; I have a xbox power supply but not really sure how to connect it, the xbox has several wires 3 thick yellow and one thinner (yellow) that supouse to be the 12v and 3 thick black and 1 thinner ; the SD press conector has 4 pins, two of them are the 12v but when and 2 de gnd , but when I cut it is only one wire.
Hope i made my self clear, could you advice what you did? thanks
The Press is a 24v system so ensure you have the correct PSU.
Xbox outputs 12v.
Re: Solidoodle 2 Power Supply
thanks for your time !!!
7 2015-07-16 21:44:32 (edited by Mahkz 2015-07-16 21:44:58)
Re: Solidoodle 2 Power Supply
wire all 12v and all - together for getting 2 kabels.
leave the thinner one untouched
And put the yellow and blue together otherwise it will be in "Waiting mode"
- carl_m1968
- Member
- Offline
Re: Solidoodle 2 Power Supply
Mahkz wrote:
wire all 12v and all - together for getting 2 kabels.
leave the thinner one untouched
And put the yellow and blue together otherwise it will be in "Waiting mode"
You are a little behind. He cant use the xbox supply as it puts out 12 volts and he needs 24 volts for his printer.
Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Re: Solidoodle 2 Power Supply
my fault tought its for an sd2 sorry than.