<![CDATA[SoliForum - 3D Printing Community — Solidoodle 2 Power Supply]]> https://www.soliforum.com/topic/11701/solidoodle-2-power-supply/ Fri, 17 Jul 2015 18:14:50 +0000 PunBB <![CDATA[Re: Solidoodle 2 Power Supply]]> https://www.soliforum.com/post/101404/#p101404 my fault tought its for an sd2 sorry than.

]]> Fri, 17 Jul 2015 18:14:50 +0000 https://www.soliforum.com/post/101404/#p101404 <![CDATA[Re: Solidoodle 2 Power Supply]]> https://www.soliforum.com/post/101362/#p101362 Mahkz wrote:

wire all 12v and all - together for getting 2 kabels.

leave the thinner one untouched

And put the yellow and blue together otherwise it will be in "Waiting mode"

You are a little behind. He cant use the xbox supply as it puts out 12 volts and he needs 24 volts for his printer.

]]> Thu, 16 Jul 2015 21:47:20 +0000 https://www.soliforum.com/post/101362/#p101362 <![CDATA[Re: Solidoodle 2 Power Supply]]> https://www.soliforum.com/post/101361/#p101361 wire all 12v and all - together for getting 2 kabels.

leave the thinner one untouched

And put the yellow and blue together otherwise it will be in "Waiting mode"

]]> Thu, 16 Jul 2015 21:44:32 +0000 https://www.soliforum.com/post/101361/#p101361 <![CDATA[Re: Solidoodle 2 Power Supply]]> https://www.soliforum.com/post/101309/#p101309 thanks for your time !!!

]]> Thu, 16 Jul 2015 15:45:48 +0000 https://www.soliforum.com/post/101309/#p101309 <![CDATA[Re: Solidoodle 2 Power Supply]]> https://www.soliforum.com/post/101276/#p101276 wardjr wrote:
userksh14 wrote:

Hi, i have the same situation with my SD press; I have a xbox power supply but not really sure how to connect it, the xbox has several wires 3 thick yellow and one thinner (yellow) that supouse to be the 12v and 3 thick black and 1 thinner ; the SD press conector has 4 pins, two of them are the 12v but when and 2 de gnd , but when I cut it is only one wire.

Hope i made my self clear, could you advice what you did?  thanks

The Press is a 24v system so ensure you have the correct PSU.

Xbox outputs 12v.

]]> Wed, 15 Jul 2015 23:49:06 +0000 https://www.soliforum.com/post/101276/#p101276 <![CDATA[Re: Solidoodle 2 Power Supply]]> https://www.soliforum.com/post/101271/#p101271 userksh14 wrote:

Hi, i have the same situation with my SD press; I have a xbox power supply but not really sure how to connect it, the xbox has several wires 3 thick yellow and one thinner (yellow) that supouse to be the 12v and 3 thick black and 1 thinner ; the SD press conector has 4 pins, two of them are the 12v but when and 2 de gnd , but when I cut it is only one wire.

Hope i made my self clear, could you advice what you did?  thanks

The Press is a 24v system so ensure you have the correct PSU.

]]> Wed, 15 Jul 2015 23:23:32 +0000 https://www.soliforum.com/post/101271/#p101271 <![CDATA[Re: Solidoodle 2 Power Supply]]> https://www.soliforum.com/post/101240/#p101240 Hi, i have the same situation with my SD press; I have a xbox power supply but not really sure how to connect it, the xbox has several wires 3 thick yellow and one thinner (yellow) that supouse to be the 12v and 3 thick black and 1 thinner ; the SD press conector has 4 pins, two of them are the 12v but when and 2 de gnd , but when I cut it is only one wire.

Hope i made my self clear, could you advice what you did?  thanks

]]> Wed, 15 Jul 2015 20:12:26 +0000 https://www.soliforum.com/post/101240/#p101240 <![CDATA[Re: Solidoodle 2 Power Supply]]> https://www.soliforum.com/post/100864/#p100864 i just did this mod and it works verry well !

]]> Sat, 11 Jul 2015 12:25:04 +0000 https://www.soliforum.com/post/100864/#p100864 <![CDATA[Solidoodle 2 Power Supply]]> https://www.soliforum.com/post/100640/#p100640 I broke my 120w standart Power Supply

i have a broken xbox 360 with an powersupply here can i use this?

12V 14,2A
Input AC
200-240~2,5A, 47-63Hz

sould have 170.4 W

is it possible?

]]> Wed, 08 Jul 2015 13:28:48 +0000 https://www.soliforum.com/post/100640/#p100640