1 Topic by Printpig

  • Printpig
  • Newbie
  • Offline
  • Registered: 2018-09-06
  • Posts: 3

Topic: Z axis not working when using Cura with DavinciMiniMaker

Hello,
     I have been using the hacked version of xyzware pro, as described in this article:

http://www.soliforum.com/topic/16978/xy … de-v21261/

     I have been using it to send g-code generated in Cura to my Davinci Mini Maker printer.  That whole process has worked fine, but when I start the print, (sliced in Cura), the z axis on my printer doesn’t move as the print is printing.  I have tried messing with the settings on Cura, with no luck fixing the problem.  I am somewhat new to using different slicers, so help would be greatly appreciated,
     
      Thanks

2 Reply by yizhou.he

  • yizhou.he
  • yizhou.he
  • Member
  • Offline
  • From: Boston, MA
  • Registered: 2017-07-05
  • Posts: 1,322

Re: Z axis not working when using Cura with DavinciMiniMaker

You need to replace all G0 to G1, please see post #9 from kr15_uk who discovered this and some more related discussion.

http://www.soliforum.com/topic/14843/cu … avinci-jr/

(Da Vinci 1.0, Jr. 1.0 RAMPS, miniMaker) X4, (Creality CR-10S, CR-10 mini, Ender-3) X4, Anycubic MEGA X4, Anycubic Chrion X1, ADMILAB Gantry X2 (MonoPrice Maker Select V2, Plus, Ultimate)X4--Select mini X1, Anycubic photon X4, Wanhao duplicate D7 X1.
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1

3 Reply by Printpig

  • Printpig
  • Newbie
  • Offline
  • Registered: 2018-09-06
  • Posts: 3

Re: Z axis not working when using Cura with DavinciMiniMaker

Thanks, I’ll have to try this!