1 Topic by kingofl337 (edited by kingofl337 2015-01-17 02:47:59)

  • kingofl337
  • Newbie
  • Offline
  • Registered: 2015-01-16
  • Posts: 4

Topic: Fix Solidoodle Press Cable Jamming

Hey guys I figured I let you know how I fixed my Solidoodle Press from having the cable jamming behind the X stage.

I took a pair of 8in zipties and slid them in the black wire loom. Then I cut excess off flush with the wire loom and put four 4in zip ties to make sure the 8in tie doesn't come out the seam on the loom. I'll post a pic later on.

Added picture.

Post's attachments

IMG_2566.JPG
IMG_2566.JPG 1.23 mb, 1 downloads since 2015-01-17 

You don't have the permssions to download the attachments of this post.
Rostock Max, Da Vinci 1.0 XYZ 0.92 Firmware, Solidoodle Press