1 Topic by argus445

  • argus445
  • Newbie
  • Offline
  • Registered: 2014-08-20
  • Posts: 1

Topic: SOLIDOODLE 4 Dial indicator mount

I'm needing help leveling the table i've tried the paper method without any luck any dial indicator mounts or stl's to help me set up the level on it?

2 Reply by eflyguy

  • eflyguy
  • Member
  • Offline
  • Registered: 2014-08-06
  • Posts: 87

Re: SOLIDOODLE 4 Dial indicator mount

http://support.solidoodle.com/hc/en-us/ … -Print-Bed

Stock SD4 with 3/16" glass attached to stock (kapton-covered) bed with Aquanet.

3 Reply by eflyguy

  • eflyguy
  • Member
  • Offline
  • Registered: 2014-08-06
  • Posts: 87

Re: SOLIDOODLE 4 Dial indicator mount

I made this one for my 4, but you'll need the bed to be close in order to print it! This is for the Harbor Freight digital indicator, you can ream the hole a little with scissors to get a tight press fit. It's a press-fit onto the extrude bolt heads, no need for magnets.

Post's attachments

My dial adapter.stl 708.46 kb, 45 downloads since 2014-08-28 

You don't have the permssions to download the attachments of this post.
Stock SD4 with 3/16" glass attached to stock (kapton-covered) bed with Aquanet.