1 Topic by jrryrggd1

  • jrryrggd1
  • Newbie
  • Offline
  • Registered: 2014-07-23
  • Posts: 2

Topic: Install E3D V6 on SD4

Sorry if this has been asked before. I am wanting to know if I have to do a software and firmware update when I install the E3D V6 on my SD4. If so, would I follow the process used for the SD3, or is the a seperate method for the SD4? Thank you for all and any help given.

2 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: Install E3D V6 on SD4

Follow the instructions I posted in this thread SoliForum - 3D Printing Community → Solidoodle Discussion → SD3 Firmware
Those are for the Printer board revision-e

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

3 Reply by jrryrggd1

  • jrryrggd1
  • Newbie
  • Offline
  • Registered: 2014-07-23
  • Posts: 2

Re: Install E3D V6 on SD4

Okay, thank you very much for your help.