Topic: UP MiNi ! The Filamen hole problem ...
please help me .. the machine cant print the model ... how to solve it ?
Re: UP MiNi ! The Filamen hole problem ...
Re: UP MiNi ! The Filamen hole problem ...
Did you try doing the thing that makes it print?
Some (or any) details about the problem might help a little bit.
4 2014-01-08 04:17:45 (edited by punkkin 2014-01-08 04:18:29)
Re: UP MiNi ! The Filamen hole problem ...
many model that i print but nothing appear ..
i think the filamen were stuck there .. how to solve it ?
Re: UP MiNi ! The Filamen hole problem ...
Perhaps a wee bit more information would help us to help you?
Re: UP MiNi ! The Filamen hole problem ...
the extrude , initialize , the setup , the calibrate ... all already take action but nothing appear .. the machine running but the ink was stuck that why the filamen doesnt appear ..
Re: UP MiNi ! The Filamen hole problem ...
You will have much better answers at the Up Mini forum-
http://www.pp3dp.com/forum/viewforum.ph … 81694c2f3f
Don't forget to read the threads there and use the search before you post your question. Someone has very likely already asked about the same problem you are having.
- wardjr
- Moderator
- Offline
Re: UP MiNi ! The Filamen hole problem ...
Am I the only one feeling PUNKED by punkkin?
Or am I missing something?
Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions
Re: UP MiNi ! The Filamen hole problem ...
i cant find the topic ..
Re: UP MiNi ! The Filamen hole problem ...
no topic about the the problem that i suffer at the thread ...
Re: UP MiNi ! The Filamen hole problem ...
should i record some video show to u about my problem ? all button already clicked but when i try print the model , the printer running but nothing appear on the board ...
Re: UP MiNi ! The Filamen hole problem ...
If there is no topic, then post a new one there. It is good manners to check first before you post to make sure you aren't asking a question that the other members have answered many times. I don't know if anyone here has an Up Mini, so it's best to ask at the forum that is devoted to the printer you have.
Re: UP MiNi ! The Filamen hole problem ...
Sounds like a clogged nozzle to me heat it up and carefully stick a guitar string through thr hole