1 Topic by AZERATE (edited by AZERATE 2014-01-01 19:04:29)

  • AZERATE
  • AZERATE
  • PRINTiT
  • Offline
  • From: Chicago
  • Registered: 2013-11-28
  • Posts: 2,077

Topic: Pausing/stopping problems

Ok. So I've been printing for about 5 weeks now, and I have NEVER had this problem, nor have I seen this on YouTube or this forum. This is the first print where the printer keeps pausing.

Only this I can think of is that I print ALL.THE.TIME. And I have not greased anything. Could that be it? Or just a RAM issue?

This problem is only occurring during the outer lines. Print is still coming out fairly well, but I am becoming rather concerned!

Printit Mason and Printit Horizon printers
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!

2 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: Pausing/stopping problems

Don't know if grease is your problem but it wouldn't hurt to just grease it up.  If that fixes it great if not at least you know that isn't the problem,

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

3 Reply by AZERATE

  • AZERATE
  • AZERATE
  • PRINTiT
  • Offline
  • From: Chicago
  • Registered: 2013-11-28
  • Posts: 2,077

Re: Pausing/stopping problems

Thanks for the reply! I've deduced that it was my computer/Repetier. The print process was hogging all the RAM, Repetier crashed, so naturally, the print failed...still turned out cool, though.

Printit Mason and Printit Horizon printers
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!