Topic: Azteeg x3 rewiring
I am going to install an Azteeg x3 and Helios bed.
I am planning on using 20AWG stranded wire to rewire everything.
will that size wire handle the steppes, heated bed & extruder.
Ultimaker S3.
1 2013-10-05 19:59:12 (edited by dubbsd 2013-10-05 19:59:37)
- dubbsd
- Member
- Offline
Re: Azteeg x3 rewiring
20ga is good for about 6A. It will be fine for steppers and extruder, not the bed.
3 2013-10-07 11:48:13 (edited by destinymolddesign 2013-10-07 21:16:55)
Re: Azteeg x3 rewiring
dubbsd wrote:
I am going to install an Azteeg x3 and Helios bed.
I am planning on using 20AWG stranded wire to rewire everything.
will that size wire handle the steppes, heated bed & extruder.
When my Azteeg X3 arrived, the wires for the steppers, hot end, thermistors, & end stops were all included. No wires for the bed though.
Correction - it did not come with hot end wires.