1 Topic by n2ri

  • n2ri
  • Member
  • Offline
  • From: St Louis MO USA area
  • Registered: 2013-02-03
  • Posts: 2,539

Topic: need to remove glass from build plate that has hairspray holding it

what cuts hairspray or can I heat bed to get glass loose without breaking it?

Solidoodle 2 with Deluxe kit cover & glass bed with heater. and 2nd board SD2 used not 3rd and alum platform not installed yet still wood. also need cooling fan installed to board. use Repetier Host couple vers. Slic3r also have all free ware STL programs

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: need to remove glass from build plate that has hairspray holding it

n2ri wrote:

what cuts hairspray or can I heat bed to get glass loose without breaking it?


Just take a paint scrapper and slid it between the glass and plate slowly. The glass will come loose.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by heartless

  • heartless
  • heartless
  • Member
  • Offline
  • From: Northcentral Wisconsin
  • Registered: 2015-04-08
  • Posts: 2,152

Re: need to remove glass from build plate that has hairspray holding it

yup, what carl said.. use a putty knife/scraper, slide in between glass & bed, and work around the perimeter with it.. it should pop loose once you get far enough around.

SD4 #1 & #2 - Lawsy carriages, E3D v6, Rumba controller board, mirror bed plate, X motor fan, upgraded PSU & Mica bed heater
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1