1 Topic by stinkingshoe

  • stinkingshoe
  • Member
  • Offline
  • Registered: 2018-04-27
  • Posts: 35

Topic: How to downgrade Da Vinci 2.0 DUO from Repetier to stock firmware

I found this info on another forum (Not sure I'm allowed to link to other forums?), but found it super easy to revert to the stock firmware in a couple of minutes, so wanted to share it with others.

Download the firmware: 

http://www.wctek.com/shop/files/F20_20140626_FW_2A19_V2.0.J_RELEASE.zip

Extract the *.bin to the same location as bossac 

C:\Users\UserName\AppData\Local\Arduino15\packages\arduino\tools\bossac\1.6.1-arduino

Get the board ready to flash by using the JP1 jumper on the back and turning the printer on for 5 seconds, then back off.
Remove the jumper, turn the printer on, and run the following command:

bossac -e -w -v -b F20_20140626_FW_2A19_V2.0.J_RELEASE.bin

2 Reply by bigrednurse

  • bigrednurse
  • Newbie
  • Offline
  • Registered: 2015-01-02
  • Posts: 8

Re: How to downgrade Da Vinci 2.0 DUO from Repetier to stock firmware

Why?  Just sell it with repetier on it, it is more valuable that way.