<![CDATA[SoliForum - 3D Printing Community — How to downgrade Da Vinci 2.0 DUO from Repetier to stock firmware]]> https://www.soliforum.com/topic/17309/how-to-downgrade-da-vinci-20-duo-from-repetier-to-stock-firmware/ Sat, 30 Mar 2019 22:14:19 +0000 PunBB <![CDATA[Re: How to downgrade Da Vinci 2.0 DUO from Repetier to stock firmware]]> https://www.soliforum.com/post/149973/#p149973 Why?  Just sell it with repetier on it, it is more valuable that way.

]]> Sat, 30 Mar 2019 22:14:19 +0000 https://www.soliforum.com/post/149973/#p149973 <![CDATA[How to downgrade Da Vinci 2.0 DUO from Repetier to stock firmware]]> https://www.soliforum.com/post/143957/#p143957 I found this info on another forum (Not sure I'm allowed to link to other forums?), but found it super easy to revert to the stock firmware in a couple of minutes, so wanted to share it with others.

Download the firmware: 

http://www.wctek.com/shop/files/F20_20140626_FW_2A19_V2.0.J_RELEASE.zip

Extract the *.bin to the same location as bossac 

C:\Users\UserName\AppData\Local\Arduino15\packages\arduino\tools\bossac\1.6.1-arduino

Get the board ready to flash by using the JP1 jumper on the back and turning the printer on for 5 seconds, then back off.
Remove the jumper, turn the printer on, and run the following command:

bossac -e -w -v -b F20_20140626_FW_2A19_V2.0.J_RELEASE.bin
]]> Mon, 07 May 2018 15:35:44 +0000 https://www.soliforum.com/post/143957/#p143957