Topic: Davinci Pro with Repetier ?
After XYZ Update on Printer i got only shit ...
Can i Flash the Printer with Repetier ? or can i Downgrade the Pro to an older XYZ Software? on Printer
2 2018-01-15 20:19:51 (edited by yizhou.he 2018-01-15 20:20:07)
- yizhou.he
- Member
- Offline
Re: Davinci Pro with Repetier ?
Da vinci Pro is not offically listed support by Repetier-firmware. And I don't think there are written guides for Downgrade the firmware. Since pro lines support 3rd party filament and have less user due to the price, the effort on hack the system is less motivated, I think.
(Da Vinci 1.0, Jr. 1.0 RAMPS, miniMaker) X4, (Creality CR-10S, CR-10 mini, Ender-3) X4, Anycubic MEGA X4, Anycubic Chrion X1, ADMILAB Gantry X2 (MonoPrice Maker Select V2, Plus, Ultimate)X4--Select mini X1, Anycubic photon X4, Wanhao duplicate D7 X1.
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1
- scobo
- Member
- Offline
Re: Davinci Pro with Repetier ?
Your best bet is Simplify3d although it doesn't come cheap but well worth the cost imho.
Davinci 1.0 with repetier firmware & E3D V6 Lite
Anycubic Photon DLP printer, Einscan-S 3D scanner
Simplify3d, 123D Design, Meshmixer
http://www.thingiverse.com/scobo/designs
Anycubic Photon DLP printer, Einscan-S 3D scanner
Simplify3d, 123D Design, Meshmixer
http://www.thingiverse.com/scobo/designs
- yizhou.he
- Member
- Offline
Re: Davinci Pro with Repetier ?
I think his issue is with updated firmware based on my understanding of English, not updated xyzware, but I can be wrong. So I don't see how Simplify3D can help in this case.
(Da Vinci 1.0, Jr. 1.0 RAMPS, miniMaker) X4, (Creality CR-10S, CR-10 mini, Ender-3) X4, Anycubic MEGA X4, Anycubic Chrion X1, ADMILAB Gantry X2 (MonoPrice Maker Select V2, Plus, Ultimate)X4--Select mini X1, Anycubic photon X4, Wanhao duplicate D7 X1.
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1
5 2018-01-17 16:28:24 (edited by carl_m1968 2018-01-17 16:29:42)
- carl_m1968
- Member
- Offline
Re: Davinci Pro with Repetier ?
His issue is with the software, not the firmware. After the recent update there are others that say the software is ruined as well. If you still have to original install disk then you can uninstall the software then reinstall from the disc. Then just not allow it to update. The other option is to do away with stock software and use as suggested Simplify3D but it is not free. It will set you back $150.
This is why I always say newest is not best and unless an update specifically claims to fix an issue you may have, it is best to stay away from them.
Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
- yizhou.he
- Member
- Offline
Re: Davinci Pro with Repetier ?
carl_m1968 wrote:
His issue is with the software, not the firmware. After the recent update there are others that say the software is ruined as well. If you still have to original install disk then you can uninstall the software then reinstall from the disc. Then just not allow it to update. The other option is to do away with stock software and use as suggested Simplify3D but it is not free. It will set you back $150.
This is why I always say newest is not best and unless an update specifically claims to fix an issue you may have, it is best to stay away from them.
Err, English is complicated. I assume the XYZ Update on Printer means firmware. How did everyone automatically get it actually means XYZware on computer?
(Da Vinci 1.0, Jr. 1.0 RAMPS, miniMaker) X4, (Creality CR-10S, CR-10 mini, Ender-3) X4, Anycubic MEGA X4, Anycubic Chrion X1, ADMILAB Gantry X2 (MonoPrice Maker Select V2, Plus, Ultimate)X4--Select mini X1, Anycubic photon X4, Wanhao duplicate D7 X1.
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1
7 2018-01-17 17:28:13 (edited by carl_m1968 2018-01-17 17:30:12)
- carl_m1968
- Member
- Offline
Re: Davinci Pro with Repetier ?
yizhou.he wrote:
carl_m1968 wrote:His issue is with the software, not the firmware. After the recent update there are others that say the software is ruined as well. If you still have to original install disk then you can uninstall the software then reinstall from the disc. Then just not allow it to update. The other option is to do away with stock software and use as suggested Simplify3D but it is not free. It will set you back $150.
This is why I always say newest is not best and unless an update specifically claims to fix an issue you may have, it is best to stay away from them.
Err, English is complicated. I assume the XYZ Update on Printer means firmware. How did everyone automatically get it actually means XYZware on computer?
XYZ software aka printer host has a habit of back ground updates and you don't know it is done until you start it the next time and find out it did update. The most recent update seems to have been worse than better.
English is even tougher when the other person may not be conveying exactly what they mean as well.
Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
- Bozotclown1970
- Member
- Offline
Re: Davinci Pro with Repetier ?
Why more people don't print from SD card I wouldn't know, but I find VM and never hooking printer to a computer that has internet access is the best way to go.
Re: Davinci Pro with Repetier ?
carl_m1968 wrote:
This is why I always say newest is not best and unless an update specifically claims to fix an issue you may have, it is best to stay away from them.
I agree 100% with this. If it aint broke, dont fix it.
10 2018-01-18 07:43:30 (edited by scobo 2018-01-18 07:47:14)
- scobo
- Member
- Offline
Re: Davinci Pro with Repetier ?
carl_m1968 wrote:
His issue is with the software, not the firmware. After the recent update there are others that say the software is ruined as well. If you still have to original install disk then you can uninstall the software then reinstall from the disc. Then just not allow it to update. The other option is to do away with stock software and use as suggested Simplify3D but it is not free. It will set you back $150.
This is why I always say newest is not best and unless an update specifically claims to fix an issue you may have, it is best to stay away from them.
My point exactly ! 
Davinci 1.0 with repetier firmware & E3D V6 Lite
Anycubic Photon DLP printer, Einscan-S 3D scanner
Simplify3d, 123D Design, Meshmixer
http://www.thingiverse.com/scobo/designs
Anycubic Photon DLP printer, Einscan-S 3D scanner
Simplify3d, 123D Design, Meshmixer
http://www.thingiverse.com/scobo/designs