1 Topic by domsan

  • domsan
  • Newbie
  • Offline
  • Registered: 2017-09-19
  • Posts: 5

Topic: Da Vinci JR w Firmware

Hello
My name is Dominik and I'm from Germany!
Please forgive me my bad english

I've got a question

I have on my da vinci jr w the firmware 2.3.4 drauf would like but the firmware 2.2.4 instalieren. but does not work
how to do it
Dominik

2 Reply by mjf55

  • mjf55
  • Member
  • Offline
  • From: Raleigh, NC
  • Registered: 2017-06-01
  • Posts: 336

Re: Da Vinci JR w Firmware

domsan wrote:

Hello
My name is Dominik and I'm from Germany!
Please forgive me my bad english

I've got a question

I have on my da vinci jr w the firmware 2.3.4 drauf would like but the firmware 2.2.4 instalieren. but does not work
how to do it
Dominik

Hi, You cannot downgrade (2.3.4 -> 2..2.4) your firmware.  xyzprinting removed that ability at firmware 2.2.7.  See http://www.soliforum.com/topic/15815/xy … w-hacking/  section 2.5.2

3 Reply by johnboyjr

  • johnboyjr
  • Member
  • Offline
  • Registered: 2015-12-08
  • Posts: 79

Re: Da Vinci JR w Firmware

if you have s3d there is away to print without resetting your tag

4 Reply by domsan

  • domsan
  • Newbie
  • Offline
  • Registered: 2017-09-19
  • Posts: 5

Re: Da Vinci JR w Firmware

Hello
Thank you for your answer .
it has tried with s3d but unfortunately I have there also the problem with the spool error as with xyzing ware
whenever he wants to start printing he has a spool error
the tag is hacked, and i always have spool error

5 Reply by mjf55

  • mjf55
  • Member
  • Offline
  • From: Raleigh, NC
  • Registered: 2017-06-01
  • Posts: 336

Re: Da Vinci JR w Firmware

domsan wrote:

Hello
Thank you for your answer .
it has tried with s3d but unfortunately I have there also the problem with the spool error as with xyzing ware
whenever he wants to start printing he has a spool error
the tag is hacked, and i always have spool error

If you hacked (reprogrammed, reset, reloaded) the tag after you used it or had it in the printer, then you will get a spool error when you go to use it.

6 Reply by domsan

  • domsan
  • Newbie
  • Offline
  • Registered: 2017-09-19
  • Posts: 5

Re: Da Vinci JR w Firmware

hy
if I use new filament of xyz runs without problems.
I have 2 tags here which are both hack and are not recognized if I want to use them. every time the printer writes me spools error