<![CDATA[SoliForum - 3D Printing Community — Da Vinci JR w Firmware]]> https://www.soliforum.com/topic/16764/da-vinci-jr-w-firmware/ Thu, 21 Sep 2017 06:30:57 +0000 PunBB <![CDATA[Re: Da Vinci JR w Firmware]]> https://www.soliforum.com/post/138334/#p138334 hy
if I use new filament of xyz runs without problems.
I have 2 tags here which are both hack and are not recognized if I want to use them. every time the printer writes me spools error

]]> Thu, 21 Sep 2017 06:30:57 +0000 https://www.soliforum.com/post/138334/#p138334 <![CDATA[Re: Da Vinci JR w Firmware]]> https://www.soliforum.com/post/138324/#p138324 domsan wrote:

Hello
Thank you for your answer .
it has tried with s3d but unfortunately I have there also the problem with the spool error as with xyzing ware
whenever he wants to start printing he has a spool error
the tag is hacked, and i always have spool error

If you hacked (reprogrammed, reset, reloaded) the tag after you used it or had it in the printer, then you will get a spool error when you go to use it.

]]> Wed, 20 Sep 2017 22:19:13 +0000 https://www.soliforum.com/post/138324/#p138324 <![CDATA[Re: Da Vinci JR w Firmware]]> https://www.soliforum.com/post/138315/#p138315 Hello
Thank you for your answer .
it has tried with s3d but unfortunately I have there also the problem with the spool error as with xyzing ware
whenever he wants to start printing he has a spool error
the tag is hacked, and i always have spool error

]]> Wed, 20 Sep 2017 20:37:38 +0000 https://www.soliforum.com/post/138315/#p138315 <![CDATA[Re: Da Vinci JR w Firmware]]> https://www.soliforum.com/post/138302/#p138302 if you have s3d there is away to print without resetting your tag

]]> Tue, 19 Sep 2017 20:54:17 +0000 https://www.soliforum.com/post/138302/#p138302 <![CDATA[Re: Da Vinci JR w Firmware]]> https://www.soliforum.com/post/138283/#p138283 domsan wrote:

Hello
My name is Dominik and I'm from Germany!
Please forgive me my bad english

I've got a question

I have on my da vinci jr w the firmware 2.3.4 drauf would like but the firmware 2.2.4 instalieren. but does not work
how to do it
Dominik

Hi, You cannot downgrade (2.3.4 -> 2..2.4) your firmware.  xyzprinting removed that ability at firmware 2.2.7.  See http://www.soliforum.com/topic/15815/xy … w-hacking/  section 2.5.2

]]> Tue, 19 Sep 2017 15:38:10 +0000 https://www.soliforum.com/post/138283/#p138283 <![CDATA[Da Vinci JR w Firmware]]> https://www.soliforum.com/post/138278/#p138278 Hello
My name is Dominik and I'm from Germany!
Please forgive me my bad english

I've got a question

I have on my da vinci jr w the firmware 2.3.4 drauf would like but the firmware 2.2.4 instalieren. but does not work
how to do it
Dominik

]]> Tue, 19 Sep 2017 10:55:23 +0000 https://www.soliforum.com/post/138278/#p138278