You are not logged in. Please login or register.
SoliForum - 3D Printing Community → XYZ Printing DaVinci → switched to repeater and extruder won't heat
Ive tried everything. Every software version of repetier and still nothing . Its not my wire connector and I have voltage. I can manually set the temp on the extruder will printing. Also its not in dry run. Does anyone have any ideas for me to check? Also my g code says its telling to heat but nothing. Ive seen other people had this problem and fixed it but didn't come back and tell how they did that.
Here is my g code
Does your printer have a heated bed? If your printer doesn't have a heated bed but you haven't specified this in repetier host then the software won't start heating the extruder until the bed is heated (which never happens as you don't have one obviously)
What you need to do is switch the bed temperature to 0. (I think this is how we solved it)
Hope this helps!
Cheers,
www.3dexfilament.co.uk
Sorry I have a da Vinci 1.0 so yes a heated bed. Anything else?
So the extruder won't heat up until the bed is fully heated?
Yep that's how it works. Man l sent hours on this lol.
So have you got it working??
Yes there was nothing wrong with it. I just had to wait to let the bed heat up first
Ok well I'm glad you now have it all working! Happy printing
SoliForum - 3D Printing Community → XYZ Printing DaVinci → switched to repeater and extruder won't heat
Powered by PunBB, supported by Informer Technologies, Inc.
