<![CDATA[SoliForum - 3D Printing Community — switched to repeater and extruder won't heat]]> https://www.soliforum.com/topic/13797/switched-to-repeater-and-extruder-wont-heat/ Sat, 20 Feb 2016 22:50:15 +0000 PunBB <![CDATA[Re: switched to repeater and extruder won't heat]]> https://www.soliforum.com/post/117059/#p117059 Ok well I'm glad you now have it all working! Happy printing

]]> Sat, 20 Feb 2016 22:50:15 +0000 https://www.soliforum.com/post/117059/#p117059 <![CDATA[Re: switched to repeater and extruder won't heat]]> https://www.soliforum.com/post/117047/#p117047 Yes there was nothing wrong with it.  I just had to wait to let the bed heat up first

]]> Sat, 20 Feb 2016 19:02:39 +0000 https://www.soliforum.com/post/117047/#p117047 <![CDATA[Re: switched to repeater and extruder won't heat]]> https://www.soliforum.com/post/117044/#p117044 So have you got it working??

]]> Sat, 20 Feb 2016 17:51:23 +0000 https://www.soliforum.com/post/117044/#p117044 <![CDATA[Re: switched to repeater and extruder won't heat]]> https://www.soliforum.com/post/117043/#p117043 Yep that's how it works. Man l sent hours on this lol.

]]> Sat, 20 Feb 2016 17:42:51 +0000 https://www.soliforum.com/post/117043/#p117043 <![CDATA[Re: switched to repeater and extruder won't heat]]> https://www.soliforum.com/post/117036/#p117036 So the extruder won't heat up until the bed is fully heated?

]]> Sat, 20 Feb 2016 16:04:11 +0000 https://www.soliforum.com/post/117036/#p117036 <![CDATA[Re: switched to repeater and extruder won't heat]]> https://www.soliforum.com/post/117035/#p117035 Sorry I have a da Vinci 1.0 so yes a heated bed. Anything else?

]]> Sat, 20 Feb 2016 16:03:01 +0000 https://www.soliforum.com/post/117035/#p117035 <![CDATA[Re: switched to repeater and extruder won't heat]]> https://www.soliforum.com/post/117032/#p117032 Does your printer have a heated bed? If your printer doesn't have a heated bed but you haven't specified this in repetier host then the software won't start heating the extruder until the bed is heated (which never happens as you don't have one obviously)

What you need to do is switch the bed temperature to 0. (I think this is how we solved it)

Hope this helps!

Cheers,
www.3dexfilament.co.uk

]]> Sat, 20 Feb 2016 15:48:35 +0000 https://www.soliforum.com/post/117032/#p117032 <![CDATA[switched to repeater and extruder won't heat]]> https://www.soliforum.com/post/117026/#p117026 Ive tried everything. Every software version of repetier and still nothing . Its not my wire connector and I have voltage. I can manually set the temp on the extruder will printing. Also its not in dry run. Does anyone have any ideas for me to check? Also my    g code says its telling to heat but nothing. Ive seen other people had this problem and fixed it but didn't come back and tell how they did that.

Here is my g code

]]> Sat, 20 Feb 2016 14:31:43 +0000 https://www.soliforum.com/post/117026/#p117026