1 Topic by CdRsKuLL

  • CdRsKuLL
  • Member
  • Offline
  • Registered: 2015-07-25
  • Posts: 26

Topic: Repetier-Host plugin ?

I was wondering if anyone had thought about making a Repetier-Host plugin?  This would enable XYZ users to send prints directly from within Repetier I would of thought and get readings etc from it like temps.

I've got a little bit of programming knowledge so might give it a go..

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Repetier-Host plugin ?

CdRsKuLL wrote:

I was wondering if anyone had thought about making a Repetier-Host plugin?  This would enable XYZ users to send prints directly from within Repetier I would of thought and get readings etc from it like temps.

I've got a little bit of programming knowledge so might give it a go..

You flash to repetier firmware for such ability the stock firmware uses a different protocol for communication which is why only XYZware works with it.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by CdRsKuLL (edited by CdRsKuLL 2015-08-10 18:13:35)

  • CdRsKuLL
  • Member
  • Offline
  • Registered: 2015-07-25
  • Posts: 26

Re: Repetier-Host plugin ?

I'm running a 1.1 plus with the built in screen so don't really want to flash.. so thinking of another way to get the gcode across.. The plugin would poll the printer every few seconds to get the temps etc and I was hoping a simple button would send the gcode across. (with included header and encoded)

I've only started playing but if you open up a serial communication port say using the arduino interface and send the following command it replies back with...

SEND
XYZv3/query=a

REPLY
ok
4:0.0.0.0
b:55   
e:2 
f:1,120399 
i:3F11XPG <-- Serial number (removed)
j:9
L:1,12637,4816
n:da Vinci 1.1 Plus
o:p8,t1,c0
p:dvF110B000
t:1,44,0 
v:1.1.0.19,1.1.7.3,1.1.K
w:1,GBA6RTH43R0133
$

This contains current bed temp / extruder temp / serial / model.. etc..

I'm running a serial port sniffer to get the info so it shouldn't be hard to reproduce the correct info just to send a file over I'm hoping....

Also, it seems to send it gcode rather than encoding it.. ie

.XYZv3/uplo
 61 64 3d 74 65 6d 70 2e 67 6f 63 64 65 2c 31 32   ad=temp.gocde,12
 37 39 35 38 38 0a                                 79588.
Packet #1850845 at 10.08.2015 18:10:40
 6f 6b 0a 24 0a 0a 00 00 00 00 00 00 20 00 3b 20   ok.$........ .; 
 66 69 6c 65 6e 61 6d 65 20 3d 20 74 75 72 6e 69   filename = turni
 67 79 20 6d 6f 6e 69 74 6f 72 20 6d 6f 75 6e 74   gy monitor mount
 2e 33 77 0d 0a 3b 20 70 72 69 6e 74 5f 74 69 6d   .3w..; print_tim
 65 20 3d 20 34 34 35 38 0d 0a 3b 20 6d 61 63 68   e = 4458..; mach
 69 6e 65 20 3d 20 64 61 56 69 6e 63 69 46 31 31   ine = daVinciF11
 0d 0a 3b 20 66 69 6c 61 6d 65 6e 74 69 64 20 3d   ..; filamentid =
 20 34 31 2c 34 31 0d 0a 3b 20 6c 61 79 65 72 5f    41,41..; layer_
 68 65 69 67 68 74 20 3d 20 30 2e 33 30 0d 0a 3b   height = 0.30..;
 20 66 69 6c 6c 5f 64 65 6e 73 69 74 79 20 3d 20    fill_density = 
 30 2e 31 30 0d 0a 3b 20 72 61 66 74 5f 6c 61 79   0.10..; raft_lay
 65 72 73 20 3d 20 30 0d 0a 3b 20 73 75 70 70 6f   ers = 0..; suppo
 72 74 5f 6d 61 74 65 72 69 61 6c 20 3d 20 30 0d   rt_material = 0.
 0a 3b 20 73 75 70 70 6f 72 74 5f 6d 61 74 65 72   .; support_mater
 69 61 6c 5f 65 78 74 72 75 64 65 72 20 3d 20 31   ial_extruder = 1
 0d 0a 3b 20 73 75 70 70 6f 72 74 5f 64 65 6e 73   ..; support_dens
 69 74 79 20 3d 20 30 2e 32 30 0d 0a 3b 20 73 68   ity = 0.20..; sh
 65 6c 6c 73 20 3d 20 32 0d 0a 3b 20 73 70 65 65   ells = 2..; spee
 64 20 3d 20 34 35 0d 0a 3b 20 62 72 69 6d 5f 77   d = 45..; brim_w
 69 64 74 68 20 3d 20 30 0d 0a 3b 20 74 6f 74 61   idth = 0..; tota
 6c 5f 6c 61 79 65 72 73 20 3d 20 31 35 30 0d 0a   l_layers = 150..
 3b 20 76 65 72 73 69 6f 6e 20 3d 20 31 35 30 37   ; version = 1507
 30 31 32 30 0d 0a 3b 20 74 6f 74 61 6c 5f 66 69   0120..; total_fi
 6c 61 6d 65 6e 74 20 3d 20 35 33 39 32 2e 38 30   lament = 5392.80
 0d 0a 3b 20 65 78 74 72 75 64 65 72 5f 66 69 6c   ..; extruder_fil
 61 6d 65 6e 74 20 3d 20 35 33 39 32 2e 38 30 3a   ament = 5392.80:
 30 2e 30 30 0d 0a 3b 20 64 69 6d 65 6e 73 69 6f   0.00..; dimensio
 6e 20 3d 20 31 30 38 2e 30 36 3a 32 30 2e 34 31   n = 108.06:20.41
 3a 34 35 2e 30 35 0d 0a 3b 20 65 78 74 72 75 64   :45.05..; extrud
 65 72 20 3d 20 31 0d 0a 47 32 31 20 3b 20 73 65   er = 1..G21 ; se
 74 20 75 6e 69 74 73 20 74 6f 20 6d 69 6c 6c 69   t units to milli
 6d 65 74 65 72 73 0d 0a 4d 31 30 37 0d 0a 3b 4d   meters..M107..;M
 31 30 34 20 53 30 20 3b 20 73 65 74 20 74 65 6d   104 S0 ; set tem
 70 65 72 61 74 75 72 65 0d 0a 3b 4d 31 30 39 20   perature..;M109 
 53 30 20 3b 20 77 61 69 74 20 66 6f 72 20 74 65   S0 ; wait for te
 6d 70 65 72 61 74 75 72 65 20 74 6f 20 62 65 20   mperature to be 
 72 65 61 63 68 65 64 0d 0a 47 39 30 20 3b 20 75   reached..G90 ; u
 73 65 20 61 62 73 6f 6c 75 74 65 20 63 6f 6f 72   se absolute coor
 64 69 6e 61 74 65 73 0d 0a 47 39 32 20 45 30 0d   dinates..G92 E0.
 0a 4d 38 32 20 3b 20 75 73 65 20 61 62 73 6f 6c   .M82 ; use absol
 75 74 65 20 64 69 73 74 61 6e 63 65 73 20 66 6f   ute distances fo
 72 20 65 78 74 72 75 73 69 6f 6e 0d 0a 47 31 20   r extrusion..G1 
 46 31 38 30 30 2e 30 30 30 20 45 2d 31 2e 30 30   F1800.000 E-1.00
 30 30 30 0d 0a 47 39 32 20 45 30 0d 0a 47 31 20   000..G92 E0..G1

So might be quite easy to do...