1 Topic by DaftPrune

  • DaftPrune
  • Newbie
  • Offline
  • Registered: 2015-04-21
  • Posts: 6

Topic: Da Vinci 1.0 Version 1.1.1 refusing to slice my model properly

What I expect:http://soliforum.com/i/?fW4kxBX.png



What I get:http://soliforum.com/i/?D5huH4h.png

Post's attachments

BristolBeaufighterPlates.stl 1.11 mb, 1 downloads since 2015-04-21 

You don't have the permssions to download the attachments of this post.

2 Reply by carl_m1968 (edited by carl_m1968 2015-04-22 00:16:06)

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Da Vinci 1.0 Version 1.1.1 refusing to slice my model properly

DaftPrune wrote:

What I expect:http://soliforum.com/i/?fW4kxBX.png



What I get:http://soliforum.com/i/?D5huH4h.png

Run the file through a service like netfabb then try it.

It could also just be the common video glitch. The sliced file is there, just does not show up. Have tried to go ahead and send it to the printer?

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by PseudoShooter

  • PseudoShooter
  • PseudoShooter
  • Member
  • Offline
  • From: Windsor, Ontario.
  • Registered: 2015-02-07
  • Posts: 194

Re: Da Vinci 1.0 Version 1.1.1 refusing to slice my model properly

This has happened to me in the past on a few .stl I had got off of Thingiverse. Netfabb fixed them right up.

Win 8.1
Improved Da Vinci 1.0 with Firmware 1.2.5 and stock extruder
Arduino cartridge resetter and after-market ABS filament
TinkerCAD, Netfabb, Simplify3D

4 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Da Vinci 1.0 Version 1.1.1 refusing to slice my model properly

PseudoShooter wrote:

This has happened to me in the past on a few .stl I had got off of Thingiverse. Netfabb fixed them right up.

The golden rule with thingiverse is that if see a model but no one has posted their own print of it, chances it needs to be fixed or is just unprintable. Thingiverse caters to 3d modeling in general, not just printing. So much of the stuff was never intended to be printed or the designer was unaware of the limitations of 3d printers.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.