76 Reply by widespreaddeadhead (edited by widespreaddeadhead 2015-05-22 14:43:50)

  • widespreaddeadhead
  • Member
  • Offline
  • From: Quad Cities IA/IL
  • Registered: 2015-01-20
  • Posts: 471

Re: Fill Issues

Can't get that version to work. I exported my config, and opened the RH package and replace slic3r, and opened it up. All my previous settings are already there, however now whenever I click on one most of the values are different and I can't save or delete any of the profiles, keeps giving me an error message that it can't load config file for some line of code deep in slic3r. Right now I;m trying to get rid of of all slic3r bits and reinstalled RH for Mac then update that slic3r.

Edit:
No luck, there is a file somewhere that slic3r keeps accessing for info about those profiles, but can't ever actually find or use them. Trying a restart to clear the temp files, and will reinstall again.

FuseBox 1.5 CoreXY - e3dv6 - Graphic Smart Display
Solidoodle 2 - e3dv6 - Hobb Goblin - e3d Titan - lawsy carriages - Direct Drive Y Axis - T8 Z axis - OctoPi

77 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: Fill Issues

One issue I ran into was the newer versions changed to using a percentage number for infill.  The older versions used a number between zero and 1.  So if you're failure is during slicing that may be the cause.  If the failure is that Slic3r won't open from RH then you need to point to the proper executable file in the Slicer tab in the Manager button.
You should be able to open that version independently first to ensure it is installed correctly.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

78 Reply by widespreaddeadhead

  • widespreaddeadhead
  • Member
  • Offline
  • From: Quad Cities IA/IL
  • Registered: 2015-01-20
  • Posts: 471

Re: Fill Issues

wardjr wrote:

One issue I ran into was the newer versions changed to using a percentage number for infill.  The older versions used a number between zero and 1.

I think this was it, I opened stand alone and every profile that had a percentage I had to delete. Copied back into RH package and everything seems fine now, running a test cube and will post results.

FuseBox 1.5 CoreXY - e3dv6 - Graphic Smart Display
Solidoodle 2 - e3dv6 - Hobb Goblin - e3d Titan - lawsy carriages - Direct Drive Y Axis - T8 Z axis - OctoPi

79 Reply by widespreaddeadhead

  • widespreaddeadhead
  • Member
  • Offline
  • From: Quad Cities IA/IL
  • Registered: 2015-01-20
  • Posts: 471

Re: Fill Issues

Top fill and threads looking great now! Now the only problem we have is printing in PLA big_smile

FuseBox 1.5 CoreXY - e3dv6 - Graphic Smart Display
Solidoodle 2 - e3dv6 - Hobb Goblin - e3d Titan - lawsy carriages - Direct Drive Y Axis - T8 Z axis - OctoPi