1 Topic by khoabui05

  • khoabui05
  • Member
  • Offline
  • Registered: 2015-01-29
  • Posts: 23

Topic: Can XYZ understand G2,G3 or is it only G1?

Hello all, I'm currently taking a CAD/CAM design class.
After looking at my GCode from Slic3r i realized that there is no G2 or G3?
So my question is can XYZ understand G2/G3 or is it that slic3r only give out G1?

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Can XYZ understand G2,G3 or is it only G1?

There is also G0 but the firmware that the XYZ uses only knows G1 commands. It is not a slicer limitation. But how the firmware interprets it and this firmware cannot interpret fast moves.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by khoabui05

  • khoabui05
  • Member
  • Offline
  • Registered: 2015-01-29
  • Posts: 23

Re: Can XYZ understand G2,G3 or is it only G1?

im currently on
XYZ Da Vinci 1.0A
Repetier .92MOD


do you know if there is another version that i can change it to so that i can understand?
Cause these circle is looking pretty bad.

4 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Can XYZ understand G2,G3 or is it only G1?

If your circles are bad then your bearing mounts are cracked or there is side to side play between the white pullies and retaining washers. May need to shim them.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.