1 Topic by L.woinson95

  • L.woinson95
  • Member
  • Offline
  • From: Burnley, Lancs, UK
  • Registered: 2015-02-07
  • Posts: 163

Topic: Printing Temp

Okay so uses what temperatures for small medium prints in different materials?

Just run off a print and only realized near the end it was at 260 on the extruder and 95 on the bed and gave a really good finish

2 Reply by scobo

  • scobo
  • scobo
  • Member
  • Offline
  • From: Scotland - UK
  • Registered: 2014-08-09
  • Posts: 993

Re: Printing Temp

I've been using various filaments lately such as Woodfill, Bronzefill and PLA.
I find the bed is fine at 60°C for everything provided it's levelled correctly and using the glue stick.
For the extruder, I use 215 for Woodfill and 220 for PLA and Bronzefill.

Davinci 1.0 with repetier firmware & E3D V6 Lite
Anycubic Photon DLP printer, Einscan-S 3D scanner
Simplify3d, 123D Design, Meshmixer
http://www.thingiverse.com/scobo/designs